Exemples d'utilisation de Base bracket en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
Selection of base brackets.
Wheel base brackets with bracing;
Secure screw 1 back to the base bracket.
Position the base bracket on the duct.
Loosen the screw(1) from the base bracket 3.
Attach the base bracket to the opposite side 7.
Remove the 3 hexagonal screws from base bracket.
Wall: Orient the Base Bracket's Half-Circle Notch, up.
Base bracket with threaded holes M-6 each 25 mm, with 30 mm high legs.
In short, this 3M sticker J-hook base bracket can be your good assistant.
Easy to install and build in andcan be wall mounted with a base bracket.
Mount the Base Bracket to the mounting surface with screws.
Insert the Tightening Screw and Nut into the Base Bracket as illustrated.
Orient the Base Bracket's Half-Circle Notch in the direction that the sensor will point.
Then use two black wood screws(provided)to secure the Vroom to the Base Bracket.
Guide the sensor's wires into the Base Bracket and through the hole in the ceiling or.
The adapter card andyour Pi are mounted on the back of the LCD screen using the supplied base brackets.
Remove skid by unscrewing all base brackets shown in photo 1 and illustration 1.
This should position the anti-tip floor bracket to engage the anti-tip base bracket on the refrigerator.
Push the ball into the Base Bracket opening until it snaps into place, being careful not to pinch the wires.
