Exemples d'utilisation de Current input source en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
The current input source is indicated on the front.
The options depend on the current input source.
The current input source name and input mode.
TV Screen: Displays the current input source screen.
When the button is pressed,the optimum settings are automatically selected for the current input source.
To check the current input source On the monitor.
Displays information about the current input source.
Shows the current input source with a cursor.
The OSD menus andoptions you see depend on the current input source.
Displays the current input source and the channel information.
Pairing can be made regardless of the current input source.
View the current input source, frequency and resolution.
Display the Source instruction pane and current input source setting.
In the input source display area of the recording screen,the input levels of the current input source and the dual recording are shown.
Recognize your current input source with a color bar at the top of the screen.
If B/ C/ D/ E on the remote control or other buttons do not work after closing the Option menu, rotate the INPUT selector on the front panel(or press one of the input selector buttons or FM or AM on the remote control)to select the current input source again.
To check the current input source Press the CALL button on the remote controller.
Press ENTER to display the current input source, followed by q/w to select the desired input source. .
The current input source name and input mode appear in the front panel display and video monitor for a few seconds.
The audio from the current input source is output to the TAPE REC and LINE 1 REC jacks.
Z- Start recording the current TV channel or the current video input source.- Press repeatedly to set up a One Touch Recording at 30, 60 or 90 minutes interval.
If there is no current video input source signal, this setting displays the last known source signal resolution and refresh rate.
Press this button to change the digital input associated with the current source input.
Press this button to change the digital input associated with the current source input.
The input of current source 32 is connected to the terminal 26a of supply source 26.
There are also audio controls located right on the front panel of the subwoofer,with an LED displaying the current source input and volume.