Exemples d'utilisation de Fuselage using en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
Fully install left wing in fuselage using screw.
Secure the wings to the fuselage using the included 2 screws(C) as shown.
Place the windscreen former in place andglue the bottoms to the fuselage using epoxy.
Secure the stabilizer to the fuselage using the hardware listed.
Install left(marked“L”) and right(marked“R”) landing gear fairings on the landing gear supports and fuselage using four(4) small screws.
On traduit aussi
Secure the battery in the fuselage using the hook and loop straps.
Trace the outline of the exhaust on the side of the fuselage using a felt-tipped pen.
Secure the fuel tank in the fuselage using the hook and loop straps provided with the model.
Install the wing on the fuselage using 4 screws.
Secure the fuel tank in the fuselage using the tie wraps included with your model.
Install your full range(sport) receiver in the fuselage using double-sided servo tape.
Secure the receiver in the fuselage using two-sided tape and a hook and loop strap.
Install the horizontal tail on the fuselage using the two screws A.
Attach the pipe tunnel plate in the fuselage using four 4-40 x 3/8-inch socket head cap screws and four 4 washers.
Remove the hatches from the bottom of the fuselage using a 1/16-inch hex wrench.
Secure the throttle servo in the fuselage using the screws provided with the servo.
Secure the remote receivers in the fuselage using hook and loop tape.
Secure the stabilizer to the fuselage using the screws and a 2 Phillips screwdriver.
Secure the receiver andremote receivers in the fuselage using hook and loop tape.
Mount the elevator servo in the fuselage using the hardware provided with the servo.