Examples of using 总线控制器 in Chinese and their translations into English
{-}
-
Political
-
Ecclesiastic
-
Programming
总线控制器向远程终端发送一个发送命令字。
总线控制器向远程终端发送一个发送命令字。
The Bus Controller sends one command word to Remote Terminal.则总线控制器.
The Bus Controller.着总线控制器.
The Bus Controller.总线控制器.
Bus Controller.Combinations with other parts of speech
Usage with verbs
Usage with nouns
总线控制器远程终端.
Bus Controller Remote Terminal.总线控制器.
The Bus Controller.这意味着总线控制器必须轮询连接到数据总线的所有远程终端，通常在主要周期中至少轮询一次。
This means that the Bus Controller has to poll all the Remote Terminals connected to the data 总线控制器接收RT1的状态字，并且看到发送命令已经接收，并且操作无误。
The Bus Controller receives RT1's status word, and sees that the transmit command has been received and actioned without a problem.通常来说，这使总线控制器发送“传送向量字模式代码”命令。
Generally, this causes the Bus Controller to transmit a Transmit Vector Word Mode Code command.总线控制器接收RT2的状态字，并且看到接收命令和数据已经无误接收和操作。
The Bus Controller receives RT2's status word and sees that the receive command and data have been received and actioned without a problem.总线控制器发送一个命令字，子地址为0或31，表示“模式代码”类型命令。
The Bus Controller sends one command word with a Sub-address of 0 or 31 signifying a Mode Code type command.总线控制器发出一个接收命令字，终端地址为31，表示广播类型命令，紧随一个发送命令。
The Bus Controller sends out one receive command word with a Terminal address of 31 signifying a broadcast type command, immediately followed by one transmit command.总线控制器发送一个接收命令字，终端地址为31，表示广播类型命令，后面紧随0到32个数据字。
The Bus Controller sends one receive command word with a Terminal address of 31 signifying a broadcast type command, immediately followed by 0 to 32 data words.总线控制器发送一个16位接收命令字，紧随1到32个16位数据字。
The Bus Controller sends one 16-bit receive command word, immediately followed by 1 to 32 16-bit data words.这个芯片组由两个部分组成，分别是AMD-751系统控制器和AMD-756外围总线控制器。
The AMD 750 chipset consists of two physical devices:the AMD-751 system PLDA设计并销售种类广泛的ASIC和FPGA互连解决方案，其中包括总线控制器和SoCIP。
PLDA designs and sells a wide range of ASIC andFPGA interconnect solutions including bus controllers and SoC IP.它的主要作用是监视和记录总线事务，而不会干扰总线控制器或RT的操作。
Its primary role is to monitor and record 或者，总线监控器可以与备用总线控制器结合使用。这允许备用总线控制器“调到正常运行”{{what}}，如果它被调用成为活动总线控制器。
Alternatively, a BM is used in conjunction with a Backup Bus Controller. This allows the Backup Bus Controller to"hit the ground running", if it is called upon to become the active Bus Controller.此外，当您处于上述设备管理器类别时，您可以尝试搜索专门针对USB(通用串行总线控制器)的驱动程序更新。
Also, while you are in the above-mentioned Device Manager category, you could try andsearch for driver updates specifically for USB(Universal Serial Bus controllers).是连接不同网络层次结构的物联网网关应用的理想选择，例如工厂现场总线，控制器和更高信息系统网络。
It is ideal for IoT gateway applications thatinterconnect different network hierarchies such as field buses in the factory, controllers, and higher information system networks.它包括CPU、GPU、总线系统以及接口控制器。
微耕公司控制器和转换器按256台设计，实际建议客户每条总线控制在80台以内。
The micro-farming company controller and converter are designed in 256 units, and it is actually recommended that the customer control each bus within 80 units.如果没有看到移动硬盘，请检查“通用串行总线控制器”（如果驱动器通过USB连接）。
If the drive is not seen there,check under Universal Serial Bus Controllers(if the drive is connected via USB).要做到这一点，您必须首先在SelectExtensions对话框中设定所使用的总线控制器(CRP81100)的数目。
To do this, you must first 这些总线控制该仪器。
Those cells control this system.CAT5270使微处理器以单条总线控制多达16个器件，而CAT5271提供单固定地址。
The CAT5270 allows microprocessor control of up to 16 devices from a single bus, while the CAT5271 offers 数据和地址通过总线控制逻辑与外面的8086系统总线相联系。
The data andaddress are linked to the outside 8086 system 串行数据I/O支持与系统控制器进行“计算机控制总线”格式通信。
Serial data I/O supports'computer control bus' format communication with the system controller.串行数据I/O支持与计算机控制器进行“计算机控制总线”格式通信。
Serial data I/O supports'computer control bus' format communication with the system controller.
