What is the translation of " FASTBOOT " in English?

• fastboot

Examples of using Fastboot in Croatian and their translations into English

Fastboot brisanje korisničkih podataka.
Fastboot erase user data.

Konfigurirajte Fastboot/ ADB na računalu.
Configure Fastboot/ADB on your PC.

Na ovaj način, možete unijeti Fastboot modu.
In this manner, you can enter the Fastboot mode.

Jednom u Fastboot trebalo bi da vidite malu sliku pingvina u sredini ekrana.
Once in fastboot you should see a small picture of a penguin in the middle of the screen.

Korak 10 Unijeti naredbu:'fastboot uređaja.
Step 10 Input the command:'fastboot devices.

Img datoteku u fasciklu Fastboot koje ste imali ranije, tako da možete lako kretati kroz datoteke.
Img file to the fastboot folder that you had earlier so that you can easily navigate through the files.

Korak 10 Unesite komandu:"fastboot uređaja.
Step 10 Input the command:'fastboot devices.

Img datoteke fastboot mapu koju ste imali ranije tako da možete jednostavno kretanje kroz datoteke.
Img file to the fastboot folder that you had earlier so that you can easily navigate through the files.

Kopirajte i pste ovu datoteku u mapu Fastboot.
Copy and pste this file to the Fastboot folder.

Ako imate potpunu instalaciju ADB-a i Fastboot-a, kopirajte datoteku u instalacijski pogon, tj.
If you have the full ADB& Fastboot installation, copy file in installation drive i.e.

Trebaš napustiti na zaslonu u Fastboot modu.
You should be leaving the screen into the Fastboot mode.

Primijetio sam nakon naredba Fastboot OEM lase počinje da daje i država greška još uvijek je potrebno potpisanu boot.
I noted after the command fastboot oem lase starts it gives and error states still need signed boot.

Korak 2 Instalirajte odgovarajuće ADB i Fastboot vozača.
Step 2 Install the appropriate ADB and Fastboot drivers.

Kako bi znati ako ste već u Fastboot modu, što će biti kad ATT& logo na ekranu i čini se da logo je zaglavi.
In order to know if you are already in Fastboot mode, you will be seeing the AT& T logo on the screen and it would seem that the logo is stuck.

Korak 6 Trebate pripremiti mapa s ADB i fastboot u to.
Step 6 You need to prepare a folder with ADB and fastboot in it.

Kako da znam da li ste već u Fastboot modu, od vas će se vidjeti AT& T logo na ekranu i čini se da je logo zaglavila.
In order to know if you are already in Fastboot mode, you will be seeing the AT& T logo on the screen and it would seem that the logo is stuck.

U jednom administrator naredbeni redak upišite'Fastboot uređaji.
In an administrator command prompt type‘fastboot devices.

Korak Nakon stvaranje siguran da je telefon već ušlo u Fastboot modu, te bi trebao biti koji upućuju na računalo preko USB kabel.
Step 3 After making sure that the phone has already entered the Fastboot mode, you should be connecting it to your computer via a USB cable.

Dalje, morate upišite u drugu naredbu koja je fastboot reboot.
Next, you have to type in another command which is fastboot reboot.

Isključite telefon i otvorite ga u načinu Bootloader/ Fastboot pritiskom i držanjem tipki za jačinu zvuka i gumba za uključivanje dok ne vidite tekst na ekranu.
Turn the phone off and open it in Bootloader/Fastboot mode by pressing and hold the volume down and power buttons till you see text appear on screen.

Korak 6 Morate pripremiti fasciklu sa ADB i fastboot u njemu.
Step 6 You need to prepare a folder with ADB and fastboot in it.

Nakon otključavanje bootloader, treba uključiti telefon u Fastboot modu držite gumb za uključivanje i tipku glasnoća dolje zajedno najmanje dvije do tri sekunde.
After unlocking the bootloader, you should turn your phone into the Fastboot mode by holding the Power button as well as the Volume Down key together for at least two to three seconds.

Ovo trepće sliku podizanja ili kernela ako je vaš telefon povezan u Fastboot modu.
This flashes a boot or kernel image if your phone is connected in Fastboot mode.

Nakon toga ćete morati da ulaz drugi kod: fastboot boot Huawei-Y536A1-root. img.
You will then need to input another code: fastboot boot huawei-Y536A1-root. img.

Korak Nakon potrebne datoteke i upravljački programi su ekstrakti i instalirati, odnosno, onda trebate uključiti telefon u Fastboot modu.
Step 2 After the necessary files and drivers have been extracted and installed, respectively, you will then need to turn your phone into its Fastboot mode.

Zatim, morate upisati u drugu naredbu koja je fastboot ponovno podizanje sustava.
Next, you have to type in another command which is fastboot reboot.

Korak 2 Nakon potrebne datoteke i vozači su izvađeni i instaliran, odnosno, onda ćete morati da pretvoriti svoj telefon u svoju Fastboot modu.
Step 2 After the necessary files and drivers have been extracted and installed, respectively, you will then need to turn your phone into its Fastboot mode.

Sljedeći korak je da unesete drugu naredbu koja je fastboot oem unlock< unlock code.
The next step is to input another command which is fastboot oem unlock< unlock code.

Problem je počeo kad sam htjela vratiti na službene nugat, Sam bio u mogućnosti povratka, ali Šišmiš datoteku koja je došla s burze sobi, nije bilo mogućnosti da se otključa bootloader, Rekao sam pokušao downgrade na mm za lase to s Fastboot OEM las počinje i Fastboot OEM las, ali to nije posao.
The problem started when I wanted to give back to the official Nougat, I was able to a return, but. bat file that came with the Stock Room, had no possibility to be unlocked bootloader, I said tried downgrading to mm for a lase it with fastboot oem las begins and fastboot oem las, but it did not work.

Korak 7 Po završetku ovog koraka unesite ponovno dobivanje način odabirom mogućnosti oporavka Fastboot izborniku, klikom na gumb za pojačavanje glasnoće dva puta.
Step 7 Once this step is done, enter the recovery mode by choosing Recovery option from the Fastboot menu, by clicking on the Volume up button twice.