Examples of using Splines in Danish and their translations into English
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
Kubiske splines skal bruge mindst 4 punkter.
Delprismer virker ikke med bezier- splines i POV- Ray 3.
Sub prisms do not work with bezier splines in POV-Ray 3.1.Lineære splines skal bruge mindst 2 punkter.
Linear splines need at least 2 points.Forfatterne tilstand: For de næste 15 år,Schoenberg havde splines alle til sig selv.
The authors of state: For the next 15 years,Schoenberg had splines all to himself.Kvadratiske splines skal bruge mindst 3 punkter.
Quadratic splines need at least 3 points.
Det var under denne krig arbejde, han indledte det arbejde, som han er mest berømt,teorien om splines.
It was during this war work that he initiated the work for which he is most famous,the theory of splines.Bezier- splines skal bruge 4 punkter for hvert segment.
Bezier splines need 4 points for each segment.I løbet af sin tid på Wisconsin, Schoenberg indføres en anden opfattelse af væsentlig betydning,nemlig cardinal splines.
During his time at Wisconsin, Schoenberg introduced another concept of major importance,namely cardinal splines.Schoenberg's mere end 40 papirer om splines efter 1960 gav mange impulser til den hurtige udvikling på området.
Schoenberg's more than 40 papers on splines after 1960 gave much impetus to the rapid development of the field.Indviklede funktioner, herunder dovetails, slots, undercuts, tråde, huller,lommer, splines og buede overflader kan opnås med MIM.
Intricate features including dovetails, slots, undercuts, threads, holes,pockets, splines, and curved surfaces are achievable with MIM.Samlestykker og splines Connect samlestykker er et produktudvalg, der anvendes til at samle profiler ved hjørnerne.
Connectors and splines Connect connectors are a range of products that are used to join profiles in corners.Dette indlæg blev udgivet i Computatilonal Geometry og mærkede Bezier-kurver, borehul, Tværsnit bygning, miljøvurdering af jord,interpolation af splines, tilhørende højder, mineralforekomster, sømærke, Segment interpolation.
This entry was posted in Computatilonal Geometry and tagged Bezier curves, borehole, Cross-section building, environmental assessment of soil,interpolation by splines, marks of heights, mineral deposits, seamark, Segment interpolation.LÃ ̧ser en fejl i SK Directional med Splines, hvor det ikke fungerede korrekt, nogle gange på justeringslag i AE.
Fixes a bug in SK Directional with Splines where it didn't work properly sometimes on adjustment layers in AE.
Når splines er beskadiget(som regel ledsaget af en indledende bang fra forsiden) akslen så smutter i ærmet- dette kan ofte resultere i en vibrationer på hjulet.
Once the splines are damaged(usually accompanied by an initial bang from the front) the shaft then slips in the sleeve- this can often result in a juddering on the wheel.Garrett var hurtige til at anbefale brugen af cubic splines(dvs. piecewise cubic polynomier med to kontinuerlig derivater) for repræsentation af glatte kurver.
Garrett was quick to recommend the use of cubic splines(i.e. piecewise cubic polynomials with two continuous derivatives) for the representation of smooth curves.Flere geostatistik funktioner er også forudsat, såsom universel og almindelig Kriging,GWR(Geografisk Vægtet Regression) og variogrammerne, samt gitter interpolation af spredt punktdata, splines, triangulering og IDW Inverse Distance Vægtet.
Several geostatistics functions are also provided, such as universal and ordinary Kriging, GWR(Geographically Weighted Regression) and variograms,as well as grid interpolation of scattered point data, splines, triangulation and IDW Inverse Distance Weighted.Dette sker når splines er beskadiget mellem hovedakslen og ærmet, som sidder mellem overførsel boks og gearkassen.
This happens when the splines are damaged between the main shaft and the sleeve which sits between the transfer box and the gearbox.Et af de problemer, der var den matematiske repræsentation af automobilindustrien overflader for at udnytte de dengang nye numerisk styrede formaling maskiner til opskæring af dør: disse dage var behov for stempling af den udvendige og indvendige paneler af biler.Garrett var hurtige til at anbefale brugen af cubic splines(dvs. piecewise cubic polynomier med to kontinuerlig derivater) for repræsentation af glatte kurver.
One of the problems posed there was the mathematical representation of automobile surfaces in order to exploit the then new numerically controlled milling machines for the cutting of dies: these dies were needed for stamping of the outer and inner panels of automobiles.Garrett was quick to recommend the use of cubic splines(i.e. piecewise cubic polynomials with two continuous derivatives) for the representation of smooth curves.Dette ændrede omkring 1960, dacomputerne blev mere udbredt, og splines først antaget deres rolle som førende værktøj til data montering og edb-støttede geometriske design.
This changed around 1960,when computers became more widespread and splines first assumed their role as the premier tool for data fitting and computer-aided geometric design.De anvendes til både vægpaneler og frithængende enheder.Connect splines benyttes til nivellering af loftplader i installationer, hvor der ikke anvendes tværprofiler som eksempelvis ved vores kant F-produkter.
They are used for both wall panels and free-hanging units.Connect splines are used for levelling tiles in installations where no cross tees are used, e.g. our edge F products.
