Examples of using Applicable medium in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Applicable Medium:Oil.
Strainer Applicable Medium.
Applicable Medium: Water.
Limited adjustment accuracy and applicable medium.
Applicable Medium Temperature.
Applicable medium: water, gas, etc.
Applicable medium: water, oil, gas, etc.
Applicable medium: Acid base organic solvent.
Applicable medium temperature: -30 ℃ ~ + 120℃;
Applicable medium: water oil gas and so on.
Applicable medium: ammonia gas, gas, steam.
Applicable medium: Water, oil, steam, etc Performance.
Applicable medium: water, corrosive media, etc.
Applicable medium: oil, gas, water or other medium; .
Applicable Medium: water, gas, oil, and other causticity medium. .
Applicable medium: Oil, Gas, Water, Sulfuric acid and nitric acid.
Applicable medium: chlorine, liquid chlorine, acid and alkali, etc.
Applicable medium: Water, water heating and other non corrosive fluid.
Applicable Medium: water, gas, oil, and other causticity medium. .
Applicable medium: Acids, bases, salts, strong oxidants of any concentration.
Applicable Medium: Oil, water, gas and other non corrosive or corrosive medium. .
Applicable medium: Petroleum based and water glycol hydraulic oiljubricating oil, emulsion, air and water.
Applicable medium: liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide and LNG.
Applicable medium for the penetration of not less than 265(25℃, 150g) 1/ 10m m of grease and viscosity greater than N68 of the lubricating oil;
Note: Applicable medium for cone penetration 250 ~ 350(25℃, 150g) 1/ 10mm grease or viscosity value of 45 ~ 150cSt the lubricating oil.
Note: Applicable medium is a lubricating oil with viscosity of not less than 265(25℃, 150g) 1/ 10mm grease(NLGI0 ~ 1) or viscosity grade greater than N68;
Applicable medium of grease, oil check valve DXF-K series is the cone penetration 250 ~ 350(25℃, 150g) 1/ 10mm grease or viscosity value of 46 ~ 150cSt the lubricating oil.
Applicable medium: the concentration of 80% sulfuric acid, 50% nitric acid, various concentrations of hydrochloric acid, liquid caustic soda, also applies to both clear liquid and slurry.
Applicable to: Medium storage density and high working turnover rate; Narrow aisle stacking.
