Examples of using Control spool in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Spring centered control spool.
The control spool is actuated via wet pin solenoids.
Spring centered control spool.
The main control spool is actuated directly by pressurization.
Control spool is returned to the central position by the compression spring.
Main valve with main control spool and centering spring.
In this way,channel A is connected to the tank via the control edge(8) at the control spool(2).
The manual override allows control spool to be moved without solenoid energization.
When the electronic solenoid is switched off,the return spring pushes the control spool back to its rest position.
Control spool of the main stage in the springcentered centralposition and/or in the offset position.
For safe opening of the valve via the control spool, a defined minimum pilot pressure is required.
Control spool of the main stage in the springcentered central position and/or in the offset position.
We provide from 35 liters to 120 liters, control spool provide from 1 bank to 8 bank.
Simultaneously, pressure is applied via the nozzle to the spring-loaded side of the control spool and via channel to.
In the de-energised condition the control spool(3) is held in the neutral or initial position by means of return.
After de-excitation of the solenoid, the return spring pushes the control spool back to its rest position.
When solenoid is de-energized, the control spool is returned to its neutral position by means of the return springs.
After de-excitation of the electronic solenoid, the return spring pushes the control spool back to its rest position.
The solenoids may also control the control spool(3) by an optional override button(6) under the de-energised.
The directional valves basically consist of housing,one type of actuation(hand lever), control spool and one or two return springs.
Spring-centered main control spool Pilot control valve: single-stage proportional directional valve.
In order toallow the ball seat valve to be safely closed, the control spool must be hydraulically unloaded.
In the de-energized state, the control spool is held in a mechanical central position by the return springs of the solenoids.
The Direct Operated Spoon Valve basically consist of housing,one type of actuation(hand lever), control spool and one or two return springs.
In the de-energized condition the control spool is held in the neutral or initial position by means of return springs(except for impulse spools). .
If the wet-pin electronic solenoid is energized, the control spool moves out of its rest position into the required end position.
The force of the electronic solenoid acts via the plunger on the control spool and pushes the latter from its rest position to the required end position.
A sufficiently high CheckValve Pressure at port X moves the control spool in the direction of the seat valve and pushes the seat poppet out of its seat.