Examples of using Input speed in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Model Input Speed.
Input Speed: 1400r/m.
Suitable for high input speeds;
Pulse input: speed pulse.
Concentricity allows for smooth rotation and higher input speed capability.
Input Speed: 3000r/min.
You can set the input speed of the Slide;
Input Speed: max1500rpm.
For example- If input speed is 100 RPM.
Input Speed: 0RPM-5000RPM.
Please note that the input speed should not exceed the max.
Input Speed: 900rpm, not larger than 1500 rpm.
Deceleration ratio: ratio of input speed and output speed. .
Max input speed rpm 5000.
Deceleration ratio: ratio of input speed to output speed. .
The material input speed can be adjusted continuously through variable transmission.
Service life:the accumulated working time of the reducer under rated load and rated input speed.
High input speeds.
Working life: the cumulative working time of thestepper motor planetary gearbox at rated load and rated input speed.
Nominal input speed(rpm) 3000.
Precision planetary Gearbox for high-torque applications, input speeds up to 6000 rpm are available in multiple ratios.
Servo motor reducer rated input speed up to 18000 RPM(about reducer itself size, speed reducer, the greater the rated input speed, the smaller) above, industrial-grade servo motor reducer output torque is generally not more than 2000 nm.
The mechanism has two, three, four stage drive changes,which can change the reduction ratio and adjust the input speed and torque of the gearbox according to the design requirements of the electronic cigarette motor.
Rated Input Speed: 16000rpm.
The required output speed n2 and input speed n1 determin the transmission ratio(i).
The maximum input speed can reach 18000rpm working life.
This value is the measured value when the input speed is 3000 RPM without load and 1 meter from the reducer.
Noise: unit dB(A), this value is the input speed of 3000 r/min, no load, 1 m away from the stepper motor planetary gearbox measured value.
The product has two-stage, three-stage and four-stage transmission changes,the reduction ratio, input speed and torque can be adjusted according to the design requirements, then realizing the requirements of camera reversal in each vision system, camera rotation of the top camera, and telescopic camera.
Speed input(magnetic/ switching).