Examples of using Linear speed in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Linear Speed(m/min).
The maximum linear speed is 27M/S.
Linear Speed M/ h.
Perform the switch between linear speed and non-linear speed. .
Linear Speed 10 Times.
Increase high output, high linear speed and save labour cost.
Linear speed of front roll.
Spindle is equipped with spindle encoder, to realize constant linear speed cutting.
Linear speed 6-60m/h.
Automatic cut film, increase high output, high linear speed and save labour cost.
Linear Speed: 1- 15m/min.
Automatic cut film, increase high output, high linear speed and save labour cost.
Linear speed of grinding head is over 90m/s.
V( t){\ displaystyle\ mathbf{ v}( t)\;} is linear speed of the center of mass of the body.
Linear speed of grinding head is over 90m/s.
Enjoy power source characterized by large pressure, stable linear speed, durable operation and little fault.
Maximum linear speed(under lubrication): 2.5m/s.
The tension controller calculates the winding diameter andload torque by measuring the linear speed of the winding to set the tension.
Adopting low linear speed design for heavy slurry to extend pump life.
The difference of speed caused bydifferent diameters should be considered according to the linear speed of the system when designing rolls.
Automatic hydraulic linear speed compensation(different with low-efficient clutch.
Volumetric flow rate:it calculates the rotational speed of motor shafts or linear speeds of piston rods expressed in cc/sec or cc/min.
Low speed and low linear speed design brings little damage to the crystals.
The whole line comes true fully automatic production, based on traditional automatic cutfilm, increase high output, high linear speed and save labour cost.
The linear speed at the end of hammer has great effect on working performance of hammer mill.
Vtl vertical lathe table adopts high-power DC motor to stepless speed regulation toachieve high torque rotation with constant linear speed turning function.
Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running.
The pe film maker whole line comes true fully automatic production, based on traditional automatic cut film, increase automatic change paper core and automatic unloading finish film system, ensure stableextrude with high output, high linear speed and save cost.
Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running.
The whole line comes true fully automatic production, based on traditional automatic cut film, fully automatic paper scroll loading & unloading system, automatic pneumatic core shaft blow off and unloadroller, greatly increases high output, high linear speed and save labour cost.
