Examples of using Roller surface in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
That is Rubber Roller Surface Measuring Instrument.
Roller surface heat treated: Hardness 50-55HRC.
Material of rollers: 45 steel, roller surfaces polishing, hard plating.
Roller surface with Teflon coat, high hardness, wear resistant, anti-sticking.
Material of rollers: CR12, roller surfaces polishing, hard plating.
Roller surfaces polishing, hard plating, heat treatment and galvanized treatment.
Material of rollers: 45 steel, roller surfaces polishing, hard plating.
It adopts specialmold for electric heating to make the temperature of roller surface uniform.
Forming roller material is GCr15, roller surface is quenching and polishing.
UHMWPE could not be sticked by any material,so no conveyor material will be sticked to roller surface.
Material of rollers: 45 steel, roller surfaces polishing, hard plating.
Clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion.
If you do not use it for long time,you should daub machine and lube in the roller surface and you need clean it when you use next time.
Brighter pressing roller surface than mirror, equal temperature of roller surface make clean, bright and homogeneous sheet.
The bi-directional loop design and helix runner inside cooling steel roller is adopted to make the even temperature of roller surface.
Leveling roller and traction roller surface with hard chromium plating, improve the service life.
Matched with vacuum device, air knife cutting or soft bellows cooling system,has a different degree of automatic and roller surface design approach.
Working temperature: convex roller surface temperature 40 ℃ to 80 ℃ concave roller slightly lower.
High Quality Cooling System-Cooling roller diameter is 1000mm, the bi-directional loop design and helix runner inside cooling steel roller is adopted to ensure even temperature of roller surface.
The latest CNC system can easilyoperate more than 35 shapes on the rubber roller surface, which includes: crowning, concave, and wave grindings;
It can enable the roller surface to reach the needed roughness by choosing the abrasive band with different granularity on the premise of not changing the geometric size.
The use of multi-screwspiral water channel design makes the roller surface temperature more uniform and the product surface quality is better.
It can enable the roller surface to reach the needed roughness by choosing the abrasive band with different granularity on the premise of not changing the geometric size.
The pressure rods with multi-head spiral channel design, so that the roller surface temperature is more uniform, the product surface quality is better.
The latest system can easilyoperate more than 35 shapes on the rubber roller surface, which includes: crowning, concave, and wave grindings; herringbone, diamond, straight groovings, etc.
The latest system can easilyoperate more than 35 shapes on the rubber roller surface, which includes: crowning, concave, and wave grindings; herringbone, diamond, straight groovings, etc.
The latest CNC system can easilyoperate more than 35 shapes on the rubber roller surface, which includes: crowning, concave, and wave grindings; herringbone, diamond, straight groovings, etc.
After dismantled the damaged fiber rope,operator should completely eliminate the colloidal matters on roller surface and other attachments to assure the light and clean of roller surface.
The TEMP of heating sealing mould is control by intelligent temperature controller with PID system, meanwhile,the TEMP detector is adopts PT roller surface detector which components is imported, one the one hand, it can be ensure the stable TEMP of roller's surface, on the other hand, it can increase leak-proofness of heating strips.
Feed rollers surface specially treated.