Examples of using Set point in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Standing by at set point.
Set point comparison for batching application.
Under frequency protection Set point 95% Hz.
Adjust TXV set point and/or refrigerant charge to achieve the desired superheat.
Under frequency protection Set point 95% Hz.
The characteristic: Slim set point, the groove is to at the left side and no scarf.
COOL = Spa water ismore than 20° F cooler than the temperature set point.
The characteristic: Slim set point, the groove is to at the left side and standard scarf.
It is an antipyretic, acting on the brain to decrease the temperature set point.
Save energy by limiting the allowable maximum and minimum set point levels.
DHC protein diet 15 bags 2 box set point times DHC replacement drinks.
Maximum internal leakage: 100 cc/min to 80% of nominal set point.
Recognizing a set point doesn't mean surrendering, yet it means understanding the deterrents you confront.
We take a 3-D image and then we pipe it into a set point topology program.
The set point at which a control closes a contact and makes a circuit is called the cut-in point. .
LCD display screen is used for the control unit, capable of displaying set point and actual.
Once the humidity is higher than the set point value, the system will switch on the nitrogen gas supply.
Reference timestamp(the prime epoch)used by NTP to work out the time from this set point.
However, thanks to the set point improvements in productivity and work, it will give you a completely new experience.
The body adjusts to the higher weight and“resets” the set point to defend the new weight.
Please note:To properly calibrate an air switch, a digital manometer orother measuring device should be used to confirm the actual set point.
LCD display screen is used for the control unit, capable of displaying set point and actual value at the same time.
Both types often provide a light-emitting diode(LED) display for enhanced readability,and can be set to maintain a single temperature set point.
Air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition transter.
Usually daylight for plants should range from 11 to 14 hours a day,so you will need to calculate the time and establish a set point in the outlet.
Die casting temperature control units are used to preheat and keep the dies at a temperature set point by circulating heat transfer fluid(water or oil) through the die.
Batch/hour of 400 Kg with temperatures set between 105 and110 °C, different set point and products insertion speed.
Offering hot water to increase the temperature or cold water to decrease the temperature according to the production demand andtemperature can be kept at the set point with variation± 1C, easy to operate, fast to increase and decrease temperature.