Examples of using Stack height in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Unloading Stack Height.
Stack height 10~110mm.
Maximum Stack Height.
Stack height 70- 250mm.
Suitable for motor stators with large stack height and small inner diameter;
Max stack height ≤70mm.
I have the same bench was not, and I improvised-put timber in a stack height of about 85 cm.
Stack height is short much.
Stator Winding feature Suitable for big stack height below 100mm, and 8poles stator.
Quick stack height changeover is available by hands;
The meter should be placed on the shelves in the warehouse and the stack height should be less than 5 cartons.
Armature stack height: Max 100mm.
This product shall be stored in the dry and ventilated warehouse with stack height nor more than 10 bags and avoid.
Maximum stack height: 1800mm.
Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I. D, stator stack height, and end coil dimension.
Minimum stack height ½ inch, 12mm.
Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I. D, stator stack height, and end coil dimension.
Stator stack height ≤80mm with plastic frame.
CPE resin shall be stored in the dry and ventilated warehouse with stack height no more than 10 bags and avoid solarzation, damp.
Maximum stack height up to 4 inches, 102mm, with rapid.
This product shall be stored in the dry and ventilated warehouse with stack height nor more than 10 bags and avoid solarization and damp.
Maximum stack height up to 4 inches, 102mm, with rapid.
High quality CPVC resin for pipe and tube Thisproduct shall be stored in the dry and ventilated warehouse with stack height nor more than 10 bags and avoid solarization and damp.
And the stack height should not lead to deformation of hose at the bottom.
Horizontal type Big power long stack length pump stator coil middle forming machine(1) Main technical data StatorOD ≤300mm Stator ID ≤200mm Stack Height ≤600 mm Height of Coil ≤70mm Pitch time ≤30s/pc….
Rapid stack height adjustment of insert station with quickchange spacers.
Collection platform inclinationheight can be adjusted with the carton stack height and the elevation motor incorporating electric braking function to keep the platform stable.
Generally material stack height in the crushing cavity shall exceed two-thirds of the crushing cavity height, and material diameter had better not exceed 50%-60% of the charge port width.
Emission parameters such as stack height, emission speed, source diameter and flow rate;