Examples of using Test temperature in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
At test temperature of.
Hot water injection test temperature: 85.
Test temperature:(80±2) °C.
Impact Test Temperature.
Test temperature: 0-100 centigrade.
People also translate
T = Measured test temperature(℃).
(3) Test Temperature: 0°C.
The lowest destructive test temperature is -20 °C.
Test temperature to 400°C.
Equipped with blackboard thermometer to adjust the test temperature in the chamber.
Theory: To test temperature and oxygen.
It is mainly applied to metallurgical industry and casting industry to test temperature.
J at a test temperature of- 20 °C.
Allow the machine to reach astable state at 18 ° C(or another test temperature) for at least one day.
Test Temperature point disposal: 100mm X 100mm.
After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ.
The test temperature of 55 °C 1 shall be maintained throughout the test including the vapour phase as well.
Software can be automatically controlled by the temperature curve program, and record the temperature of the furnace,furnace pressure, the test temperature and other data back.
Application: test temperature change of water tank.
Salt liquid preheating Equilibrium between salt-liquid temperature and the temperature in the box(without theinfluence of too low salt-liquid temperature on the test temperature).
(3) test temperature at room temperature Max working pressure 0.42 Mpa Max working tempture 70 degree(polypropyene material).
In the process of heat transfer dough pieces with the heating surface of the furnace and the steam-air mixture in the baking chamber heating test occurs,characterized by changes in the various layers of the test temperature.
FTTH cable bracket passed the tensile tests, operation experience with temperatures ranging from-60 °C up to +60 °C test, temperature cycling test, aging test, corrosion resistance test etc.
Haoyu every quarter for all types of products for a cycle test, test temperature, humidity, light, rain, wind cycle and other environmental conditions on the product performance within the period of haoyu product quality requirements, to ensure the product in the specified life period, under different environmental conditions of functional reliability.
Extra Safety and Durable: Masses of high test intensity ensure extra safety and durable, likePlug testing, Salt Spray Test, Bending test, Temperature Environmental test, aging test and so on.
When kneading in a kneader of continuous prolonged doughshould have the following technological parameters: test temperature of about 40 ° C, humidity of the dough of flour I grade 25-26%, of flour 24%; the duration of dough made from flour I and higher grade 40-50 minutes.
The equipment is divided into high temperature box, low temperature box, test box of three parts, adopt unique thermal structures and heat storage effect, perfectly still, the object under test in testing the application of cold and hot wind path switching to cold,hot hot and cold impact test temperature import test area.
If the contents are sensitive to heat or if the aerosol dispensersare made of plastics material which softens at this test temperature, the temperature of the bath shall be set at between 20 °C and 30 °C but, in addition, one aerosol dispenser in 2000 shall be tested at the higher temperature. .
All the assemblies passed the tensile tests before delivery, operation experience with temperatures ranging from-60 °C up to +60 °C test, temperature cycling test, aging test, corrosion resistance test. .
Tested Temperature operating range -70 degrees F to +210 degrees F.