Examples of using Hydroxide in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Metal Hydroxide Wastewater.
At the cathode(C), water is reduced to hydroxide and hydrogen gas.
First, hydroxide attacks a carbonyl.
The main active substance of thedrug Almagel Neo is an aluminum hydroxide gel.
Potassium hydroxide can be made directly from wood ash and in this form, is known as caustic potash or lye.
People also translate
Additional substances: water for injection, sorbitol, sodium hydroxide and edetat.
Sodium hydroxide is used as the absorption neutralizing liquid, and the purification efficiency is 95%-98% or more.
Yellow ochre, FeO(OH)·nH 2O,is a hydrated iron hydroxide(limonite) also called gold ochre.
Does not recommend is suitable for most concentrated solvent, oil,concentrated acid after dilute sodium hydroxide.
Raw paper, corn(potatoes) starch, industrial sodium hydroxide, borax and anything else for trial running.
Sodium hydroxide is easily soluble in water, the solubility increases with temperature, can give off a lot of heat when dissolved.
Corrosion resistance:Resistant to 50% sodium hydroxide, 38%concentrated hydrochloric acid, 50% resistance to sulfuric acid.
The printing ink contains shellac, propylene glycol, strong ammonia solution,potassium hydroxide, and black iron oxide.
Soak the plate in a 10% sodium hydroxide(NaOH) aqueous solution or in top remover concentrate solution in temperature 30OC.
Talc, kaolin and raw alumina powder can be blended to produce this chemistry(other materials are also used e.g. aluminum hydroxide, steatite and other MgO minerals).
Put the exposed plate into 1% sodium hydroxide(NaOH) aqueous solution for 8-10 seconds, or into 5% sodium carbonate(Na2CO3).
For example, calcium spontaneously reacts with water more quickly than magnesium andless quickly than strontium to produce calcium hydroxide and hydrogen gas.
The preparation also contains magnesium hydroxide and simethicone- a substance that helps to reduce increased gas formation in the intestine.
If the water is acidic or acidic(pH value is less than 1), the water's pH can be increased by mixing lime, lemon, soda ash,or sodium hydroxide with water during the water purification process.
Sodium hydroxide is not used as a primary standard because it is hygroscopic and absorbs carbon dioxide from air.
Esomeprazole Sodium for Injection contains esomeprazole sodium 21.3 mg or 42.5 mg equivalent to esomeprazole 20 mg or 40 mg,edetate disodium 1.5 mg and sodium hydroxide q. s. for pH adjustment.
IntroductionAluminium Hydroxide is also called the ammonia water/ammonia solutions, the main ingredient of nh4oh, the aqueous solution of ammonia,….
Chemical Absorbent Roll absorb chemical liqui such as sulfuric acid, hydrochloric acid, nitric acid, phosphoric acid,sodium hydroxide, ammonia, to help prevent inappropriate use of anti-overflow spare parts;
Solubility: soluble in mineral acids and alkali hydroxide solution, slightly soluble in water, soluble in alcohol, ether, acetone, chloroform. Odorless, bitter taste.
Pantoprazole Sodium for Injection is supplied as a freeze-dried powder in a clear glass vial fitted with a rubber stopper and crimp sealcontaining pantoprazole sodium, equivalent to 40 mg of pantoprazole, edetate disodium(1 mg), and sodium hydroxide to adjust pH.
By auto detect and auto adding system, the ammonium hydroxide and hydrogen peroxide are added to control the Fe quantity in flux and reduce the zinc consumption.
The processed form(in which the lacquer is stirred continuously until much of the water content has evaporated) is called guangqi(光漆) in Chinese but comes under many different Japanese names depending on the variation, for example, kijiro-urushi(木地呂漆) is standard transparent lacquer sometimes used with pigments and roiro-urushi(黒呂色漆)is the same but pre-mixed with iron hydroxide to produce a black coloured lacquer.
In order to produce high-purity beryllium metal, the hydroxide form is dissolved in ammonium bifluoride and heated to above 1652°F(900°C), creating a molten beryllium fluoride.
Calcium hydroxide is bitter, the solution can make a particular indicator of discoloration of the material(such as the stone to blue, so that phenol phthalocyanine red, etc.), Inorganic Compound PH value greater than 7.
Heat up less than 1% sodium hydroxide to 80-85℃, after circulate 20 min, wash the tank by 90℃ clean water, and then cool the tank by aseptic normal temperature water or self-cool.