Examples of using Maximum load in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The maximum load: 140kg.
The larger the air spring, the greater the maximum load it can support.
Maximum Load Weight 130KGS.
Conveyor maximum load: 160kg.
Maximum load power: 1500W.
The workbench maximum load(kg) 150.
Maximum load bearing pressure.
Front axle allows maximum load(kg) 1250.
The maximum load is 15 ton.
Rear axle allows maximum load(kg) 2400.
Maximum Load on Platform 800kg.
Rails designed and manufactured to carry a maximum load of 1,000 Kg of Weight per linear meter of wagon.
The maximum load of the table: 500kg.
SPL-RF04 work with very low power consumption,and range from AC 90V to 240V, maximum load current is up to 10A.
Can hold a maximum load capacity of 25KG.
This series of products are divided into 0.1 to 0.8 tons,can also be customized according to user requirements, the maximum load can reach 10 tons.
Maximum Load on telescopic platform 400kg.
And unloading is conducted between specified minimum and maximum load or elongation limits, or can be performed randomly.
Maximum load 5 kg: Economical consumpt….
This series of products are divided into 0.1 to 0.8 tons of load, can also be customized according to user requirements, the maximum load of up to 10 tons.
Exceeding the maximum load of 10%, automatic protection.
In cyclic loading tests repeated loading andunloading is conducted between specified minimum and maximum load or elongation limits, or can be performed randomly.
Minimum/maximum load cell impedance: 87 Ω to 1000 Ω.
Relay sensor adopts high-quality relay,normally open interface has the maximum load AC 250V/10A and DC 30V/10A. The sensor is a signal input with a trigger voltage of 0.7V or more.
The maximum load for which the load cell is designed.
In any case, the maximum load can not exceed the theoretical maximum allowable load.
Maximum load: test the maximum load of various corrugated cartons and beehive crates.
Qmax is the maximum load to the thermoelectric device that produces ΔT= 0.
The maximum load bearing size is the same as the standard bearing, but the inner and outer rings have a trough, which increases the number of balls and improves the rated load. .
In any case, the maximum load must not exceed the theoretical maximum allowable load. .