The array is sliced starting from the index, start, and n elements are sliced out.
অ্যারের সূচী থেকে শুরু কাটা হয়, start, এবং n উপাদান কাটা হয়।
The best way in my opinion is to use the Array. forEach function.
আমার মতে সেরা উপায় Array. forEach ফাংশন ব্যবহার করা হয়।
They get their own heap space,and the address of each object goes inside the array.
তারা তাদের নিজস্ব হিপ স্পেস পায়,এবং প্রতিটি বস্তুর ঠিকানা অ্যারের ভিতরে যায়।
We want to iterate over the array and don't create a new array:..
আমরা অ্যারের উপর পুনরাবৃত্তি করতে চান এবং একটি নতুন অ্যারে তৈরি করবেন না:।
Now, you could keep a second iterator, like j,to increment only when valid values are read from the array.
এখন, আপনি j মতো দ্বিতীয়ইটারারেটর রাখতে পারেন যখন কেবলমাত্র অ্যারে থেকে বৈধ মানগুলি পড়তে হয়।
Both spinach and 1 do not exist in the array, causing an E_NOTICE to be triggered.
উভয় spinach এবং 1 অ্যারের মধ্যে বিদ্যমান নেই, যার ফলে একটি E_ WARNING ট্রিগার করা হয়।
The second point can give you a lotof problems, for example, if the Array.
দ্বিতীয় বিন্দু এটি আপনাকে অনেক সমস্যা দিতে পারে, উদাহরণস্বরূপ,যদি আপনি সেখানে একটি পদ্ধতি অন্তর্ভুক্ত করার জন্য Array।
The maximum capacity of the array is 14 SAS hard disk drives(up to 1 TB each).
অ্যারের সর্বোচ্চ ধারণক্ষমতা 14 এসএএস হার্ড ডিস্ক ড্রাইভ( 1 টিবি প্রতিটি পর্যন্ত) হয়।
However, if you lose two disks from the same set, then the array is totally lost.
যাইহোক, যদি আপনি একই সেট থেকে দুটি ডিস্ক হারান তবে অ্যারের সম্পূর্ণরূপে হারিয়ে যাবে।
Find the index of the array element you want to remove, then remove that index with splice.
আপনি সরিয়ে ফেলতে চান এমন অ্যারের উপাদানটির index খুঁজুন, তারপর সেই splice সহ সরান।
Add(E element) is O(1) amortized, but O(n) worst-case since the array must be resized and copied.
Add( E element) হল O( 1) amortized, কিন্তু O( n) খারাপ- কেসটি যেহেতু অ্যারেটি পুনরায় আকার এবং কপি করা উচিত।
The array element is the ion generator device that sit down into water and creates ion charge and flow within the solution.
অ্যারের উপাদান আয়ন জেনারেটর ডিভাইস যে জলে বসে আয়ন চার্জ সৃষ্টি ও সমাধান মধ্যে প্রবাহিতহয়।
Under the covers, that gets an iterator from the array and loops through it, getting the values from it.
কভারের অধীনে, এটি অ্যারে থেকে একটি ইনিশিয়েটর পায় এবং এর মধ্য দিয়ে loops, এটি থেকে মান পেয়ে।
The second point is that it can give you alot of problems, for example, if you extend the Array.
দ্বিতীয় বিন্দু এটি আপনাকে অনেক সমস্যা দিতে পারে, উদাহরণস্বরূপ,যদি আপনি সেখানে একটি পদ্ধতি অন্তর্ভুক্ত করার জন্য Array।
One wrong move in choosing from the array of traditional blouse designs and designer blouse patterns could ruin your style quotient.
ঐতিহ্যগত ব্লাউজ ডিজাইন এবং ডিজাইনার ব্লাউজ প্যাটার্নের অ্যারে থেকে নির্বাচন একটি ভুল পদক্ষেপ আপনার শৈলী ভাগফল নিকুচি পারে।
The traditional for() iterator, is by far the fastest method,specially when used with the array length cached.
ঐতিহ্যগত for() iterator, দ্রুততম পদ্ধতি দ্বারা,বিশেষ করে যখন অ্যারে দৈর্ঘ্য ক্যাশে সঙ্গে ব্যবহৃত হয়।
The array is indexed by the environment variables, each element being the value of that variable(e.g., ENVI- RON["HOME"] might be/home/arnold).
অ্যারে পরিবেশ ভেরিয়েবল দ্বারা সূচী করা হয়, প্রতিটি উপাদান সেই পরিবর্তনশীলের মান হচ্ছে( উদাঃ, পরিবেশ[" হোম"] হতে পারে/ হোম/ আর্নল্ড)।
However, there will come a time when the system will needRAID recovery service if the problem hits the array as a whole.
কিন্তু, সিস্টেম প্রয়োজন হবে একটা সময় যখন সেখানে আসতে হবে RAID-র পুনরুদ্ধারের সেবা সমস্যা একটি সম্পূর্ণ অ্যারে হিট।
That is enough, because the method then modifies the array element, and by convention you're expecting element 0 to contain the return value.
এটি যথেষ্ট, কারণ পদ্ধতিটি অ্যারের উপাদানটি সংশোধন করে এবং কনভেনশন অনুসারে আপনি প্রত্যাবর্তন মূল্য ধারণ করার জন্য উপাদান 0 টি প্রত্যাশা করছেন।
If you want a new array with the deleted positions removed,you can always delete the specific element and filter out the array.
যদি আপনি মুছে ফেলা অবস্থানগুলি মুছে ফেলার সাথে একটি নতুন অ্যারে চান তবে আপনি সর্বদা নির্দিষ্ট উপাদান মুছে ফেলতে এবং অ্যারে ফিল্টার করতে পারেন।
As data is distributed between 0 and 255 when the array is sorted, around the first half of the iterations will not enter the if-statement(the if statement is shared below).
অ্যারের সাজানো হয় যখন তথ্য 0 এবং 255 মধ্যে বিতরণ করা হয়, পুনরাবৃত্তির প্রথম অর্ধেক- স্ট্যাটমেন্ট প্রবেশ করবে না if( ifবিবৃতি নীচে ভাগ করা হয়)।
Ignoring the dangers and problems inherent in null,and the space wasted, this can be problematic if the array needs to be precise.
বিপদ এবং সমস্যাগুলি নিঃশব্দে অন্তর্নিহিত সমস্যাগুলিকে অগ্রাহ্য করে,এবং স্থানটি নষ্ট হয়ে যায়, অ্যারের সুনির্দিষ্ট হওয়ার প্রয়োজন হলে এটি সমস্যাযুক্ত হতে পারে।
Companies have had to study the array of prices they can charge and pick the ones that give them the most profit, even though it means turning away many potential customers.
কোম্পানিগুলিকে মূল্যের অ্যারের অধ্যয়ন করতে হয় যা তারা চার্জ করতে পারে এবং যাদেরকে তাদের সবচেয়ে বেশি মুনাফা দেওয়া যায় তা বেছে নিতে পারে, যদিও এটি অনেক সম্ভাব্য গ্রাহককে ঘুরিয়ে দেওয়ার অর্থ।
If the attacker can replace the Array or Object constructor or some other method used during object construction, anything in the JSON would pass through the attacker's code, and be disclosed.
যদি আক্রমণকারী অ্যারে বা অবজেক্ট কনস্ট্রাকটর বা বস্তুর নির্মাণের সময় ব্যবহৃত অন্য কোন পদ্ধতি প্রতিস্থাপন করতে পারে তবে JSON- এ যেকোনো কিছু আক্রমণকারীর কোডটি পাস করবে এবং প্রকাশ করা হবে।
As you can see- the array list if much more efficient, although in theory each insert in the middle of the list will require"move" the n later elements of the array(lower values are better):.
যেহেতু আপনি দেখতে পারেন-, অ্যারে তালিকা অনেক বেশি দক্ষ যদি যদিও তত্ত্ব তালিকা মাঝখানে প্রতিটি সন্নিবেশ" স্থানান্তর" প্রয়োজন হবে এন পরে অ্যারের উপাদানের( নিম্ন মান আরও ভাল হয়):।
বাংলা
عربى
Български
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文