Examples of using Program counter in English and their translations into Bulgarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The Program Counter.
It represents the computation of the address which is then stored in the program counter.
This program counter is actually a programmable divider which outputs a divided down value of the RF signal.
This signal is then applied to the phase detector which also monitors the program counter output.
The programmable divider(or program counter) is set using switches at pins 15, 16, 17& 18(D0-D3).
This signal is then applied to the phase detector which also monitors the program counter output.
The programmable divider(or program counter) is set using switches at pins 15, 16, 17& 18(D0-D3).
Instructions are executed sequentially unless an instruction changes the content of the program counter.
The program counter(PC) is a 32-bit register that contains the address of the next instruction to be executed.
A process is an executing program, including the current values of the program counter, registers, and variables.
Through the program counter are extracted as many bytes as the length of the instruction and the program counter is updated.
But when the current instruction is a branch or jump instruction,then that address is copied from the instruction to the Program Counter.
At power-up, the central processor would load its program counter with the address of the boot ROM and start executing instructions from the ROM.
In practice, the phase detector adjuststhe varicap voltage so that the divided RF oscillator frequency is 100kHz at the program counter output.
The Program Counter is the register that holds the address of the next instruction to be carried out these instruction are automatically incremented to the next‘instruction.
In practice, the phase detector adjuststhe varicap voltage so that the divided RF oscillator frequency is 100kHz at the program counter output.
This creates static tables at compile time andlink time that relate ranges of the program counter to the program state with respect to exception handling.
Note, however, that the average frequency of the RF oscillator(ie, the carrier frequency) remains fixed,as set by the programmable divider(or program counter).
The Program Counter is copied to the Memory Address Register which hold the address of the memory locations from which information will be read or to which data will be written and occasionally.
Note, however, that the average frequency of the RF oscillator(ie, the carrier frequency)remains fixed, as set by the programmable divider(or program counter).
When that process comes to be suspended, all of its machine state,including the program counter(PC) and all of the processor's registers, must be saved in the processes task_struct data structure.
There is a number of registers which carry out certain functions, e.g. memory address register, memory buffer register,stack pointer, program counter and the process status register.
JSR: jump to subroutine JSP:jump and save program counter PUSHJ: push down and jump JRST: jump and restore All sensitive instructions in the System/370 are privileged: it satisfies the virtualization requirements.
Equally, when the context of the new process is loaded, it too will be a snapshot of the way things were at the end of the scheduler,including this processes program counter and register contents.
As well as the program's instructions and data,the process also includes the program counter and all of the CPU's registers as well as the process stacks containing temporary data such as routine parameters, return addresses and saved variables.
This describes a design architecture for an electronic digital computer with subdivisions of a processing unit consisting of an arithmetic logic unit and processor registers,a control unit containing an instruction register and program counter, a memory to store both data and instructions, external mass storage, and input and output mechanisms.
The key to the program counter Estrogenic Diet seems to avoid the foods that the authors consider a high estrogenic chemicals that they claim not only in some commonly eaten food, but also cause extinction of some species of living.
Three digits of one accumulator(6) were used as the program counter, another accumulator was used as the main accumulator, a third accumulator was used as the address pointer for reading data from the function tables, and most of the other accumulators were used for data memory.
Three digits of one accumulator(6)were used as the program counter, another accumulator(15) was used as the main accumulator, a third accumulator(8) was used as the address pointer for reading data from the function tables, and most of the other accumulators(1- 5, 7, 9- 14, 17- 19) were used for data memory.
It's a counter program that you only need to deal with once.