What is the translation of " CLOSED-LOOP CONTROL " in Chinese?

• 闭环控制
• 一个闭环控制

Examples of using Closed-loop control in English and their translations into Chinese

This enables better and smoother closed-loop control.
这有利于实现更好更平滑的闭环控制。

For a closed-loop control system, if the direction of the feedback signal is not correct, the consequences must be disastrous.
试方向对于一个闭环控制系统，如果反馈信号的方向不正确，后果肯定是灾难性的。

From the pool pump to the air purification unit, closed-loop control is one of the most basic tasks of an embedded system.
从水池水泵到空气净化装置，闭环控制都是嵌入式系统最基本的任务之一。

In the closed-loop control process, the existence of zero drift will have a certain impact on the control effect, it is best to suppress it.
在闭环控制过程中，零漂的存在会对控制效果有一定的影响，最好将其抑制住。

Among them, the advantage of using inverter is to provide closed-loop control, but it is easy to cause torque loss under large load.
其中，使用逆变器的优点是提供了闭环控制，但在大负载下很容易引起转矩损失。

In the closed-loop control process, the existence of zero drift will have a certain impact on the control effect, it is best to suppress it.
在闭环控制过程中，零漂移的存在会对控制效果产生一定的影响，最好对其进行抑制。

When the robot trajectories are known, the robot can use GPS positioning and a closed-loop control to make sure it remains on track.
如果机器人的运动轨迹是已知的，就可以使用全球定位系统和一个闭环控制来确保它保持在轨道上。

The typical automatic closed-loop control cycle should be as low as milliseconds, and the reliability is also very high.
典型的自动化闭环控制周期应低至毫秒级，同时对可靠性也提出了极高要求。

The general structure of industrial robot electric servo system is three closed-loop control, namely current loop, speed loop and position loop.
工业机器人电动伺服系统的一般结构是三个闭环控制，即电流回路，速度回路和位置回路。

And Elfin robots use closed-loop control design, and the way of hollow routing has greatly improved its accuracy and safety.
并且Elfin机器人采用闭环控制设计，中空走线的方式使其精确度和安全性有了极大的提升。

Although it was not contemplated convenient for control initially, wireless technology has briskly emerged from sensor-only applications to closed-loop control.
虽然最初控制不方便，但无线技术从仅传感器应用到闭环控制已经迅速发展。

(C) the test direction- for a closed-loop control system, if the feedback signal direction is not correct, the consequences must be disastrous.
试方向对于一个闭环控制系统，如果反馈信号的方向不正确，后果肯定是灾难性的。

As the linear motor mover and workstations have been fixed together, so only closed-loop control, the unit's control system diagram shown in Figure 2.
由于直线电机动子和工作台已固定在一起，所以只能采用闭环控制，图2所示为该单元的控制系统简图。

(C) the test direction- for a closed-loop control system, if the feedback signal direction is not correct, the consequences must be disastrous.
三、测试方向对于闭环控制系统，如果反馈信号的方向不正确，后果将是灾难性的。

Often these designs fail to take full advantage of the key features and peripherals available in modern MCUs to most efficiently implement closed-loop control systems.
通常这些设计未能充分利用可用的关键特征和外围设备在现代单片机最有效地实现闭环控制系统。

To prevent instabilities in the closed-loop control system or so-called ringing, the 4.7 pF capacitor was inserted between IOUT and RFB;
为了防止闭环控制系统不稳定或所谓的响铃振荡，在IOUT和RFB之间插入4.7pF电容；.

This means that single-point data transfers may not happen exactly when expected, and therefore USB is not recommend for closed-loop control applications, such as PID.
这意味着单点数据不可能完全按照预期进行传输，因此，并不建议使用USB实现PID等闭环控制应用。

First, U.S. companies using closed-loop control of automated production more secure, reliable, easy to run the entire production line maintenance.
首先，美国企业采用的闭环控制的自动化生产更加安全可靠，便于整条生产线运行的维护。

The pulse test bench adopts the control mode combining computer and PLC to realize the generation and adjustment of arbitrary waveforms through closed-loop control.
脉冲试验台采用计算机与PLC结合的控制方式，通过闭环控制实现任意波形的生成和调整。

ORNL is also developing closed-loop control for the BAAM and large-scale metal 3D printers, which could usher in an era of fully automated 3D printing.
ORNL还正在开发用于BAAM和大型金属3D打印机的闭环控制，这可能迎来一个全自动3D打印的时代。

Although they are great for open loop control, it's easy to implement a closed-loop control by adding limit switches, Hall effect sensors, and optical sensors.
虽然它们非常适合开环控制,但通过添加限位开关、霍尔效应传感器和光学传感器,可以轻松实现闭环控制。

For everything else, closed-loop control is necessary to ensure the speed, consistency and accuracy required for industrial applications, such as metalwork.
对于其他的安排，在机械加工厂必须进行闭环控制，以确保工业应用（如金属加工）所需的速度，一致性和准确性。

Because its control mode is usually open-loop or closed-loop control, it can achieve high-precision control of injection molding process parameters.
由于其控制方式通常为开环或闭环控制，因此可以对注塑工艺参数实现高精度控制。

Platform stabilization systems employ closed-loop control systems to actively cancel this type of motion, thus preserving mission-critical performance objectives for these instruments.
平台稳定系统采用闭环控制系统，以主动消除此类运动，从而保证达到这些仪器的重要性能目标。

Since the control method is usually open-loop or closed-loop control, high-precision control of the injection moulding process parameters is possible.
由于其控制方式通常为开环或闭环控制，因此可以对注塑工艺参数实现高精度控制。

(1)Stable and reliable temperature closed-loop control, real-time collecting, recording, storage of process control data and have the corresponding classification retrieval, query and print function.
稳定可靠的温度封闭控制，实时采集，记录和存储过程控制数据以及相应的分类，检索，查询和打印功能。

At present, more plastic molding machine uses a closed-loop control, that is, according to on-line measurement value and set the value of the deviation control..
目前，更多的注塑机采取的是闭环控制，即依照在线丈量值与设定值的偏差进行控制。

At present, more plastic molding machine uses a closed-loop control, that is, according to on-line measurement value and set the value of the deviation control..
目前，更多的注塑机采用的是闭环控制，即按照在线测量值与设定值的偏差进行控制。