What is the translation of " FUEL INJECTION " in Chinese?

• 燃油喷射
• 喷油
• 燃料喷射

Examples of using Fuel injection in English and their translations into Chinese

Ported Fuel Injection.
燃料喷射阀门.

Honda had planned to resolve the issue by updating the engine's fuel injection control software.
本田计划更新发动机的汽油喷射控制软件。

Electronic Fuel Injection University.
电子燃料喷射.

For example, diesel engines on buses and large trucks generally use in-line fuel injection pumps.
例如公共汽车和大货车上的柴油机一般用直列式喷油泵。

Electronic fuel injection.
电喷版.

The fuel injection control device can automatically increase the fuel supply.
当启动时，燃料喷射控制装置可以自动增加燃料供应。

It can simply be a change in the fuel injection strategy.
这可能仅仅是一个燃料注入战略的改变。

No oil leakage, no fuel injection, no pollution to the working environment.
无油泄漏，无喷油，对工作环境无污染。

Mueller said engine manufacturers are"starting to show excitement" about ducted fuel injection.
Mueller说，发动机制造商对管道燃料喷射“开始表现出兴奋”。

Strengthening the production of fuel injection systems and spare parts.
加强生产燃油注射系统及各零配件的能力。

The cost of the fuel injection air compressor is slightly lower and the quality of gas production is not high.
喷油空气压缩机的成本稍低，气体生产质量也不高。

During the 1980s, EL systems were developed alongside other improvements such as fuel injection systems.
在1980年代，电打火系统随着其他改进得到发展，例如燃料喷射系统。

SpaceX rocket fuel injection method is approved by NASA or used for manned launch.
Spacex火箭燃料加注方法获nasa认可或用于载人发射.

The high pressure common rail system can achieve functions that cannot be achieved in conventional fuel injection systems.
高压共轨系统可实现在传统喷油系统中无法实现的功能。

However, many marine fuel injection systems are not designed to handle the low viscosity properties of MGO.
然而，许多船用燃料喷射系统在设计时并不适合用于处理MGO的低粘度特性。

The all-terrain vehicle began to be equipped with an automatic transmission, fuel injection system, air conditioning, leather trim.
全地形车开始配备自动变速箱，燃油喷射系统，空调，皮革装饰。

(four) the fuel injection advance angle is too small and the unburned diesel oil is discharged from the white oil mist.
四）喷油提前角过小，未燃烧的柴油呈白色油雾排出。

These companies have been in varying markets from solar, to wind turbines, fuel injection, engine controls, consumer products, and medical devices.
这些公司进入了不同的市场，包括太阳能，风力涡轮机，燃料喷射，发动机控制，消费产品和医疗设备。

To avoid damage to the fuel injection components, MGO has to be cooled to increase its viscosity before it can be used.
为了避免损坏燃油喷射部件，必须冷却MGO以增加其粘度后才能使用。

The industries in which the companies have been involved include solar power, wind turbines, fuel injection, engine controls, consumer products and medical devices.
这些公司参与的行业包括太阳能，风力涡轮机，燃料喷射，发动机控制，消费产品和医疗设备。

The fuel injection processing industry is also constantly applied to various products, especially electronic digital products.
喷油加工行业也不断应用在各类产品上，尤其电子数码产品上.

Digital controls have replaced the traditional analog types for more precision and controlled fuel injection rates and timings to enhance combustion and reduce exhaust gases.
数字控制取代传统的模拟类型更高的精度和控制燃油喷射率和时间，以提高燃烧和减少废气。

The standard gap between the fuel injection pump body and the tappet body is 0~0.03mm, if more than 0.2mm, the parts should be replaced.
喷油泵体和挺柱体之间的标准间隙为0～0.03mm，如超过0.2mm，则应更换零件。

Fuel injection pressure is an important indicator for diesel engines because it is linked to engine power, fuel consumption, emissions, etc.
燃油喷射压力是柴油发动机的重要指标，因为它联系着发动机的动力、油耗、排放等。

Different types of diesel engines have different requirements for fuel injection time, such as 4135 diesel fuel injection time for the top deadline 28° to 31°.
不同类型柴油机燃油喷射时间有不同的要求，如核对点在4135型柴油机燃油喷射是28°31°。

Electronic fuel injection, new porting, splayed exhaust valves and other refinements were also needed for improved long-term durability, cooling and oiling.
电子燃油喷射、新端口、展开的排气阀和其他改良之处也需要在长期耐用性、制冷和润滑方面进行改进。

The automatic quantitative electronic fuel injection system replaces the traditional carburetor, and the ABS brakes are replaced by motors.
自动定量电子喷油系统取代传统化油器，ABS刹车皆改由电机.

In vehicles, automatic& quantitative fuel injection system have replaced traditional carburetors, and small motors have replaced the ABS systems.
汽车中的自动定量燃油喷射系统已经取代了传统的化油器，小型电动机已经取代了ABS系统。

Bosch K-Jetronic mechanical fuel injection on the 512 BBi replaced the outgoing model's four, triple-choke Weber 40 IF 3C carburettors.
BBi的博世K-Jetronic机械燃油喷射装置取代了旧型号上的四腔和三腔阻风门的Weber40IF3C化油器。