What is the translation of " FULL DUPLEX " in Chinese?

• 全双工
• 全双

Examples of using Full duplex in English and their translations into Chinese

Please explain: Full duplex.
声卡:完全Duplex支持.

RS-232(full duplex and receive only).
RS-232(全双工和仅接受)，.

The virtual circuit is full duplex;
虚拟电路是全双工的;

A full duplex MODEM can receive and transmit data at the same time.
全双工Modem则可同时接收和发送数据。

The host network card and the switch port must be capable of operating in full duplex mode.
主机的网卡和交换机断口必须能够运行在全双工模式下。

Full duplex link is the key to expanding fast Ethernet(100Mbps).
全双工链路是扩展快速以太网（100Mbps）的关键。

The equivalent FC technology today is 2 Gb FC, which can achieve 200 MB/sec full duplex.
今天，与其等同的FC技术是2GbFC，它能够达到全双工200MB/秒。

It supports full duplex communication and allows baud rate up to 1Mbps.
它支持全双工通信，允许波特率高达1Mbps。

Many wireless links, such as phones and Wi-Fi, are bi-directional and can even be full duplex.
许多无线链路（如电话和Wi-Fi）都是双向的，甚至可以是全双工的。

A full duplex modem allows transmitting and receiving data simultaneously.
全双工Modem则可同时接收和发送数据。

Design, can be selected by software RS-232, RS-422 or RS-485 port, and, half/ full duplex can be.
设计时，可以通过软件选择RS-232、RS-422或者RS-485端口，而且，半／全双工皆可。

TCP is full duplex and both ends need to send FIN and ACK when disconnecting.
TCP是全双工的，在断开连接时两端都需要发送FIN和ACK。

Because light can only travel in one direction over optical fiber, two fibers are required to support full duplex operation.
因为光仅以单向通过光纤，如果支持全双工操作，则需要两根光纤。

For full duplex communication, but communication distance is only 10 meters.
RS232与RS422一样为全双工通讯，但是通讯距离只有10米。

Switches with 100 Mbps fast Ethernet can run in full duplex mode and can set up dedicated 200 Mbps connections.
带有100Mbps快速以太网的交换机可以全双工方式运行，可以建立起专用的200Mbps连接。

It is a full duplex connection, which means that data is sent and received simultaneously.
它是全双工连接，这意味着数据同时发送和接收。

With this program, you can work even on low-power computers with sound cards that do not support Full duplex operating modes.
使用此程序，您甚至可以在具有不支持全双工操作模式的声卡的低功耗计算机上工作。

Full duplex operation requires four wires, while half duplex requires only two.
全双工操作需要四芯线，而半双工只需要两芯线。

If you configured the adapter for full duplex, make sure the switch port is also configured for full duplex.
如果将适配器配置为全双工，请确保将交换机端口也配置为全双工。

In addition, it needs to be explained that there are differences between RS422 and RS485: RS422 is 4-wire system, full duplex mode;
另外还需要说明的是，RS422和RS485也有区别：RS422为4线制，全双工模式；.

But with the arrival of full duplex USB 3.0, the data structure will now require double the information.
但随着全双工USB3.0的到来，现在的数据结构需要加倍的信息。

It will require a Software Defined Radio capable of Transmitting(TX) and Receiving(RX) at the same time, a feature known as full duplex.
它需要一个软件定义无线电可以实现同时发射（TX）和接收（RX），我们把这一性能称为全双工。

Use Pipeline(under Full Duplex feature of TCP) to enhance the communication efficiency of RPC framework.
使用Pipeline(在TCP全双工特征下)来增强RPC框架的通信效率。

Industrial switches with 100Mbps fast Ethernet and 10Mbps Ethernet ports can run in full duplex mode and can establish dedicated 20Mbps to 200Mbps connections.
带有100Mbps快速以太网和10Mbps以太网端口的交换机可以全双工方式运行，可以建立起专用的20Mbps到200Mbps连接。

For mailbox servers, a full duplex 100 megabits per second(Mbps) network connection is typically sufficient.
就邮箱服务器而言，通常一个每秒100兆比特(Mbps)的全双工网络连接已足够。

This is critical for Full Duplex DOCSIS, where the underlying semiconductor technology must handle higher frequencies.
这对于全双工DOCSIS至关重要，其中基础半导体技术必须处理更高的频率。

SPDY socket is a full duplex applications, both the sending and receiving, and general HTTP to send after receiving different.
SPDY的socket是全双工应用，同时发送和接收，和一般的HTTP先发送后接收不同。

RS-422 is always full duplex(if the device is not listen only), RS-485 can be full(4-wire mode) or half duplex(2-wire mode).
RS-422始终为全双工(如果设备不是仅监听)，RS-485可以是完整(4线模式)或半双工(2线模式)。

Another variation of FDDI, called FDDI Full Duplex Technology(FFDT) uses the same network infrastructure but can potentially support data rates up to 200 Mbps.
FDDI的另一个变种，称为FDDI全双工技术（FFDT），它采用与FDDI相同的网络结构，但传输速率可以达到200Mbps。