Examples of using Hardware interrupts in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Hardware interrupts and software interrupts. .
Percentage of processor time spent handling hardware interrupts.
There are 2 types of interrupts: hardware interrupts and software application interrupts.
The percentage of time the processor spent servicing hardware interrupts.
Hardware interrupts are always handled in kernel space, whereas signals are user-space only things.
But PCI manages hardware interrupts at the bus bridge, allowing it to use a single system IRQ for multiple PCI devices.
There are two types of interrupts: hardware interrupts and software interrupts.
Monitors the percentage of elapsedtime that processors on the system spent handling hardware interrupts.
Irqbalance is a command line tool that distributes hardware interrupts across processors to improve system performance.
Tasks take precedence over idle loops, below software interrupts and hardware interrupts.
Embedded system programmers often deal with hardware, interrupts, RTOS, etc., all of which require volatile variables.
Hardware Interrupts- They occur in response to an external event, such as an external interrupt pin going high or low.
Generally the kernel handles all hardware, and informing processes is done somewhat independant of the hardware interrupts.
Hardware interrupts are simply a kind of exception, which the kernel may choose to map to a signal(for example, if you use alarm(2)).
Most Arduino designs have two hardware interrupts(referred to as"interrupt0" and"interrupt1") hard-wired to digital I/O pins 2 and 3, respectively.
The Arduino Mega has six hardware interrupts including the additional interrupts("interrupt2" through"interrupt5") on pins 21, 20, 19, and 18.
Most Arduino designs have two hardware interrupts(referred to as"interrupt0" and"interrupt1") hard-wired to digital I/O pins 2 and 3, respectively.
Multitasking is also implemented through exploiting a hardware interrupt.
A signal is similar to a hardware interrupt but does not employ priorities.
One example of a hardware interrupt that has nothing to do with signals is the VM subsystem.
When the monitor is ready to paint, it sends the hardware interrupt which initiates the paint cycle.
When a device sends a signal to the CPU, a hardware interrupt occurs.
RPS does not increase the hardware interrupt rate of the network device.
Initially, programmers with low-level knowledge of the machine wrote interrupt service routines andthe suspension of the main process was initiated through a hardware interrupt.
There are two types of interrupts: hardware and software interrupts. .
In some architectures IOMMU also performs hardware interrupt re-mapping, in a manner similar to standard memory address re-mapping.