Examples of using Link layer in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
The data link layer.
The Link Layer Discovery Protocol.
These logical signal paths are defined by Data Link layer protocols.
The Link Layer Topology Discovery.
The IEEE Ethernet Data Link layer has two sublayers.
People also translate
Data link layer protocol, derived from the X.
The bridge connectsmultiple network segments of the network at the data link layer.
Data Link layer- Provides an interface with the network adapter;
Network layer handed down this packet to Data link layer.
For example, the data link layer originally dealt only with point-to-point net-.
LoRaWAN defines the media access control(MAC) in the data link layer and is maintained by the LoRa Alliance.
Some common link layer protocols include IEEE 802.2 and X. 25.
Because the switch works in the second layer of OSI(data link layer), its working principle is relatively simple.
It works on data link layer, not only to extend the network distance or range, and can.
WAN access standards typically describe both physical layer delivery methods anddata link layer requirements, including physical addressing, flow control, and encapsulation.
Broadcast- When the link layer protocol is Ethernet or FDDI, OSPF considers the network type as.
The Controller Area Network(CAN) protocol defines the Data Link Layer and part of the Physical Layer in the OSI model.
The data link layer lies on top of the physical channel, which maintains the wireless communication between the users and the network.
PROFINET DCP is an Ethernet link layer protocol and offers multiple services.
Data Link layer services and specifications are defined by multiple standards based on a variety of technologies and media to which the protocols are applied.
The transaction layer also receives response packets from the link layer and matches these with the original software requests.
The data link layer receives packets from and directs packets to an upper layer protocol, in this case, IPv4 or IPv6.
Unlike the protocols of the upper layers of the TCP/IP suite,Data Link layer protocols are generally not defined by Request for Comments(RFCs).
However, the Data Link Layer generally poses restrictions to the maximum frame size, for instance, 1500 bytes over an Ethernet network.
Protecting such a connection with data link layer controls would require deploying a separate control to each link, which is not feasible.
Because the data link layer is below the network layer, controls at this layer can protect both data and IP information.
In some networks, the data link layer handles transmission errors by requesting that damaged frames be retransmitted.
However, the Data Link Layer usually poses limits to the maximum frame size- for example 1500 bytes over an Ethernet network.
It works on data link layer, not only to extend the network distance or range, and can improve network performance, reliability and security.