What is the translation of " PLASTICIZING " in Chinese?

• 塑化

Examples of using Plasticizing in English and their translations into Chinese

This is very effective for improving the plasticizing quality and efficiency?
这对提高塑化质量和效率是非常?

There are many reasons for the plasticizing section, and the excessively cold end of the barrel is one of the main causes of screw slip.
塑化部分有很多原因，而筒体的过冷端是螺杆滑动的主要原因之一。

All these new designs are designed to add plasticizing and mixing effects.
所有这些新型设计是为了增加塑化和混练效果。

The development trend of“plasticizing steel” and“plasticizing wood” provides a broad market space for the development of plastic products industry.
以塑代钢”、“以塑代木”的发展趋势为塑料制品业的发展提供了广阔的市场空间。

This is very effective for improving the plasticizing quality and efficiency.
这对提高塑化质量和效率是非常有效的。

When using recycled material(sheet material), increase the conveying capacity of the feeding section and adopt the forced feeding plasticizing system.
使用回收料（片料）时，加大加料段的输送能力，采用强制进料塑化系统。

It is the part of heating and extrusion plasticizing, which is the core of plastic machinery.
是加热挤出塑化的部分，是塑料机械的核心。

The barrier type over-adhesive head can be selected for increasing the plasticizing effect;
可选用阻隔型过胶头来提高塑化效果。

The external lubricant prolongs the plasticizing time by reducing the adhesion and friction to the metal surface.
外部润滑剂通过减少对金属表面的粘附和摩擦来延长塑化时间。

A+B component, additive, color and so on are fully mixed into the plasticizing system.
A/B组分、添加剂、颜色等完全混合，进入塑化系统。

When all of the solid polymer disappears, the end of the plasticizing section is reached and the melt transport section begins.
当全部固态聚合物消失时则达到塑化段末端，而熔体输送段开始。

The effect of lubricant on low temperature impact is mainly reflected by its effect on the plasticizing of products.
润滑剂对制品低温冲击的影响，主要是通过对制品塑化效果的影响反映出来。

It must be pointed out that the starting point of the plasticizing section is usually not the starting point of the compression section.
必须指出，塑化段起点通常不是压缩段起始点。

When using recycled material(sheet material), increase the conveying capacity of the feeding section and adopt the forced feeding plasticizing system.
使用再生材料(片状材料)时，增加给料段的输送能力，采用强制给料塑化系统。

For the industrial additives market, this will include polymer plasticizing, surface enhancement and processing improvements.
对于工业添加剂市场，则包括聚合物塑化、表面增强和工艺改进。

Correspondingly, the plasticizing and mixing ability of the screw is also required to increase, which requires the screw to withstand greater torque.
与此相应地要求螺杆的塑化和混合能力也随之增大，这就要求螺杆能够承受更大的扭矩。

In addition, in plastic processing, higher die temperature will also reduce plasticizing time and cycle times.
此外，在塑胶的加工中，高一点的模具温度还会减少塑化时间，减少循环次数。

In general operation, the determination of plasticizing pressure should be as low as possible to ensure the quality of the product.
在一般操作中，在保证产品质量的前提下，尽可能降低塑化压力的测定。

In addition, in the plastic processing, the higher the mold temperature will reduce plasticizing time, reduce cycle times.
此外，在塑胶的加工中，高一点的模具温度还会减少塑化时间，减少循环次数。

Each plastic has an ideal plasticizing processing temperature range, and the barrel processing temperature should be controlled to be close to this temperature range.
每种塑料，都有一个理想塑化的加工温度范围，应该控制料筒加工温度，使之接近这个温度范围。

In addition, in the processing of plastics, a higher mold temperature will also reduce the plasticizing time and reduce the number of cycles.
此外，在塑胶的加工中，高一点的模具温度还会减少塑化时间，减少循环次数。

Each plastic has an ideal plasticizing processing temperature range, and the barrel processing temperature should be controlled to be close to this temperature range.
每种塑料，都有一个理想塑化的加工温度范围，应该控制螺杆料筒加工温度，使之接近这个温度范围。

The important process conditions of injection molding are the influence of plasticizing flow and cooling temperature, pressure and corresponding various action time.
注射吹塑成型的重要工艺条件是影响塑化流动和冷却的温度，压力和相应的各个作用时间。

Injection molding is a cyclic process, and each cycle mainly includes: quantitative feeding- melt plasticizing- pressure injection- mold filling cooling- mold extraction.
注射成型是一个循环的过程，每一周期主要包括：定量加料-熔融塑化-施压注射-充模冷却-启模取件。

Based on experience, preliminarily set the amount of plasticizing, injection pressure limit, injection speed, cooling time and screw speed and other parameters, and appropriate optimization.
根据经验，初步设定塑化量、注射压力的限定值、注射速度、冷却时间以及螺杆转速等参数，并对其进行适当的优化。

The ZE Basic series of twin-screw extruders are universal machines for 80% of plasticizing, filling and reinforcement applications without any major equipment adjustments.
ZEBasic系列的双螺杆挤出机是通用机，适用于80%的塑化、填充和增强应用，而且不需要任何重大的设备调整。