Examples of using Rollers in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Indoor Trainer/ Rollers.
ASIA/ Conveyor Rollers/ Conveyor Accessories.
In a belt conveyor,there are at least 2 to 5 rollers.
Just next to us, two rollers were"working".
The foam rollers can be close to the skin or not.
Bearings without a cage incorporate a maximum number of rollers.
ASIA/ Conveyor Rollers/ Conveyor Accessories.
The following image shows the two white rollers on this mouse:.
Foam rollers can help normal women to become curly during the sleep.
The Panel concludes that the rollers had a value of USD 55,912.
Balls and rollers are different in how they make contact with the raceways.
Comfortable seats with wide-spread lateral support rollers await passengers.
Widely open rollers, brings together fans of fun and to spend time outdoors.
The international distribution of printing machines and dessin rollers was finally resumed.
Hot rollers are the magical tool that can help formal women to become curly women.
It is also possible to remove the rollers to ensure the stability of machine during operation.
Rollers can come from a variety of lengths offering multiple options depending on throughput or material saving needs.
For surface cleaning, ordinary multi-angle rollers and shock-buried cleaning devices are used.
(1) All rollers must be lined up, parallel to each other, and maintained horizontally.
If the bearing area is too small, the rollers are prone to skidding during actual operation.
As rollers circulate within the linear guide, lubricant is continuously distributed to the loading area along the track rail.
Inside the house, there's a closet with seven-foot rollers for rolling up damask tablecloths so they never have to be creased.
All the rollers of the coating machine should be controlled within the allowable range, otherwise the surface quality of the coating will be seriously affected.
Recently premium massagechairs have added the ability to extend the rollers into your back and retract them back into the chair.
Non-continuous fibers made by rollers or air streams are called fixed-length glass fibers, commonly referred to as short fibers.
However, undue experimentationisn't required to determine the force required between rollers, since there are simple procedures for determining the optimal spring strength needed.
Normal bearings with rollers or balls would melt down or explode at these speeds.
Another operator then uses rollers to smooth out and process each square centimetre of surface.
Non-continuous fibers made by rollers or air flow are called fixed-length glass fibers, commonly known as short fibers.