What is the translation of " THESE BITS " in Chinese?

• 这些bits
• 这些位

Examples of using These bits in English and their translations into Chinese

I love these bits:.
我喜爱这些对白：.

These bits are read only.
这些映射是只读的。

You just gotta go through these bits.
你必须穿过这些碎石。

These bits always read 00.
这两位的读出值总是为00。

And that will cause this-- that will cause this-- all these bits to be classified as a one.
这将导致这个--这将导致这个--所有这些位被归类为1。

Bit 0- 7: These bits are versatile.
Bit0-7:这些bits定义音效。

These bits can be modified only when the PLL is OFF.
这些位仅能在PLL关闭时改写。

Bit 16- 30: The value of these bits represents the integer part of the.
Bit16-30:这些bits数的值表示定点数字的整数部份。

These bits are reserved and should always be maintained as‘0'.
这些位是保留位且始终保持为0。

And all of these bits overlap each other in time.
并且所有这些位在时间上彼此重叠。

These bits define the beginning and end of the data packet so the receiving UART knows when to start reading the bits..
这些位定义数据包的开始和结束，因此接收UART知道何时开始读取位。

True to their name, these bits mark the beginning and end of a packet.
如它们的名字所示，这些位标记了一个包的起始和结束。

It is these bits and pieces, the insignificant time, that constitutes our lives.
正是这些点点滴滴、微不足道的时光，才组成了我们的生命。

Bit0- 9: The value of these bits specifies how many lines in one frame.
Bit0-9:这些bits的值决定一个时间帧里，有多少像素线条。

Bit0- 15: These bits are set to indicate the tag value of a graphics object which is being.
Bit0-15:这些bits用来表示正被触摸的图形物件的标记值。

Through to their name, these bits mark the beginning and the ending of a packet.
如它们的名字所示，这些位标记了一个包的起始和结束。

These bits of RNA bind to specific genetic messages called mRNA in the cell and direct enzymes to recognize the messages as enemies.
这些小片的RNA结合到细胞中的特定遗传信息（称为mRNA），并指导酶将这些信息识别为敌人。

Since we can already send these bits and bytes to each other, what's the point of using a blockchain?
既然我们已经可以将这些数字位和字节发送给对方，那么使用区块链有什么意义？?

Bit 0- 7: These bits are interrupt flags set by the FT800.
Bit0-7:这些bits是FT800设定的中断标记。

Bit0- 31: These bits are set to zero after reset.
Bit0-31:在复位后这些bits会被设为零。

Bit 0- 7: These bits are used to mask the corresponding interrupt.
Bit0-7:这些bits是用来遮盖对应的中断言号。

Bit 0- 7: These bits control the volume of the audio file playback.
Bit0-7：这些bits控制播放音频档案的音量。

Bit 0- 15: These bits control the touch screen resistance threshold.
Bit0-15:这些bits的值控制触屏阻值的阈值。

Bit 0- 15: These bits are the resistance of touching on the touch screen.
Bit0-15:这些bits是触摸触屏的阻值。

Bit 0- 7: These bits are set to divide the main clock for PCLK.
Bit0-7:这些bits是被设定来当作主时钟的除数，以供输出为PCLK。

Bit 0- 7: These bits are updated with tag value by FT800 graphics engine.
Bit0-7:这些bits会被FT800的图形引擎以标记值做更新。

Bit0- 31: These bits are set by FT800 as the CRC value of RGB signals output.
Bit0-31:这些bits的值是由FT800设定，当作RGB信号输出的CRC值。

Bit 0- 15: These bits control the touch-screen charge time, in the unit of 6 system.
Bit0-15：这些bits控制触屏的充电时间，单位是6个系统时钟周期。

Bit 16- 31: These bits are set to indicate the tracking value for the tracked graphics objects.
Bit16-31:这些bits是设定来标示被追踪图形物件的追踪值。