What is the translation of " THIS BIT SETS " in Chinese?

• 该位设置
• 此位设置

Examples of using This bit sets in English and their translations into Chinese

This bit sets the masking of SPI0 interrupt.
此位设置SPI0中断的优先级。

This bit sets the priority of the CP1 interrupt.
该位设置CP1中断的优先级。

This bit sets the masking of the SMB0 interrupt.
此位设置SMB0中断的屏蔽。

This bit sets the masking of the SMB0 interrupt.
该位设置SMB0的中断屏蔽。

This bit sets the priority of the VBUS interrupt.
该位设置VBUS中断的优先级。

This bit sets the priority of the USB0 interrupt.
该位设置USB0中断的优先级。

This bit sets the priority of the SMB0 interrupt.
该位设置SMB0中断的优先级。

This bit sets the priority of the SMB0 interrupt.
此位设置SMB0中断的优先级。

This bit sets the priority of the SPI0 interrupt.
此位设置SPI0中断的优先级。

This bit sets the priority of the UART0 interrupt.
此位设置UART0中断的优先级。

This bit sets the priority of the UART0 interrupt.
该位设置UART0中断的优先级。

This bit sets the priority of the Timer 2 interrupt.
该位设置定时器2中断的优先级。

This bit sets the masking of external interrupt 1.
该位用于设置外部中断1的中断屏蔽。

This bit sets the priority of the ADC0 Window interrupt.
此位设置ADC0窗口中断的优先级。

This bit sets the priority of the External Interrupt 1 interrupt.
此位设置外部中断1中断的优先级。

This bit sets the priority of the External Interrupt 1 interrupt.
该位设置外部中断1的中断优先级。

This bit sets the priority of the ADC1 End of Conversion interrupt.
该位设置ADC0转换结束中断的优先级。

This bit sets the priority of the ADC0 Conversion Complete interrupt.
该位设置ADC0转换结束中断的优先级。

This bit sets the priority of the ADC0 Conversion Complete interrupt.
此位设置ADC0转换完成中断的优先级。

This bit sets the masking of the Capture/Compare Flag(CCFn) interrupt.
该位设置捕捉/比较标志(CCFn)的中断屏蔽。

Accessed the CPU sets this bit when this page is used.
Accessed在使用该页后，CPU会设置此位.

When this bit is set to 1.
如果这个参数据设置为1.

Setting this bit is the only way to set the PendSV exception state to.
将该位置位是把PendSV的异常状态设置成挂起的唯一方法。

When this bit is set, Timer 2 operates as two 8-bit timers with auto-reload.
当此位被设置时，定时器2作为两个8位自动重载定时器操作。

If this bit is set, PCA Module 4 is used as the watchdog timer.
如果该位被置1，PCA模块4被用作看门狗定时器。

Bit 0: The host can set this bit to 1 to enable the global interrupt of FT800.
Bit0:主机可以设定这个bit为1，以启动FT800全域中断。

All frames sent from client to server have this bit set to 1.
所有从客户端发往服务器的帧必须把此位设为1。

Setting this bit is the only way to set the PendSV exception state to pending.
注：向该位写1是将PendSV异常设置为挂起状态的唯一方法。

Reset(pos): sets the bit at pos to false.
Reset(pos):将某一位设置成false。

Sets its dirty bit to false.
将其dirty位设置为false。