What is the translation of " THREE-AXIS " in Chinese?

• 三轴
• 一个三轴

Examples of using Three-axis in English and their translations into Chinese

Nor is he just a three-axis motor system.
我认为这不仅仅是一个三缸发动机。

Three-axis MEMS accelerometer sensor with 16-bit ADCs and signal conditioning.
三轴MEMS加速度传感器，16位ADC和信号调节。

Xiaomi called her device Three-axis Shooting Stabilizer.
小米叫她的装置三轴拍摄稳定器。

Their three-axis control system is still in use, more than 100 years after its development.
轴控制系统是目前仍在使用超过一个世纪它被开发了。

SFU is an unmanned, reusable, sun-pointing, three-axis stabilized satellite.
空间飞行器是一种无人的、可多次使用的、指向太阳的、以三个轴平衡的卫星。

It will have a three-axis stabilized bus with two panels of solar arrays and batteries.
该卫星有一个三轴稳定航天器以及两组太阳能电池组和太阳能电池。

The HKE21001 is a low-power, low-noise, three-axis automotive angular rate sensor.
罕王HKE21001是低功耗、低噪声、3轴汽车用角速度传感器。

Three-axis accelerometers provide fore/aft, lateral, and vertical acceleration to be measured.
三轴加速计提供要测量的前后、左右和垂直加速度。

In 1873, Spencer of the United States made a single-axis automatic lathe, and soon he made a three-axis automatic lathe.
年，美国的斯潘塞制成一台单轴自动车床，不久他又制成三轴自动车。

On each, there's a three-axis accelerometer that measures vibrations to predict a vehicle's path of arrival.
每个平板都有一个三轴加速度计，能够测量振动并预测车辆的路径。

In 1873, Spencer of the United States made a single-axis automatic lathe, and soon he made a three-axis automatic lathe.
年，美国的C.斯潘塞制成单轴自动车床，不久又制成三轴自动车床。

Each of the slabs has a three-axis accelerometer able to measure vibrations and predict the path of the vehicle.
每个平板都有一个三轴加速度计，能够测量振动并预测车辆的路径。

The company had remained primarily a turning shop, having three CNC turning centers and only one supporting three-axis mill.
公司主要为一个车削车间，有3个CNC车削中心和一个支撑三轴铣床。

A three-axis momentum bias system accurately maintains attitude stability on-orbit throughout the satellite' s life.
三轴偏置动量系统在卫星的整个使用寿命中精确地维持在轨飞行姿态稳定性。

The controller supports motion detection via a three-axis gyroscope and three-axis accelerometer and vibration.
控制器通过三轴陀螺仪、三轴加速度计和振动进行运动检测。

This three-axis system is based on the Cartesian coordinate system in mathematics, which is where the printer derives its name from.
该三轴系统基于数学上的笛卡尔坐标系，这是打印机从中得出其名称的地方。

Analog Devices, Inc.(ADI) has developed the ADXL356/ADXL357 three-axis sensor family especially for CBM applications.
ADI公司（ADI）开发了ADXL356/ADXL357三轴传感器系列，尤其适用于CBM应用。

For horizontal and three-axis testing of very large payloads, up to 12,000 kg(26,455 lb), such as satellite components.
用于高达12,000kg（26,455lb）的极大有效负载的水平和三轴测试，如卫星部件。

The actions of the anti-aircraft batteries are controlled from the division command post, which receives information from the three-axis all-round radar.
防空电池的动作由分割指挥所控制，该指挥所接收来自三轴全方位雷达的信息。

The vertical machining center is at least three-axis and two-linkage, and generally can realize three-axis three-linkage.
立式加工中心最少是三轴二联动，一般可实现三轴三联动。

A three-axis machine can move in the x, y, and z-axis, whereas a 5-axis machine can move in these 3 axes along with 2 rotational axis.
三轴机床可以在x，y中移动，和z轴，而5轴机床可以在这3个轴上与2个旋转轴一起移动。

By using five-axis technology versus conventional three-axis machining, fewer setups are required to create a part with complex geometry.
通过使用五轴技术与常规三轴加工，更少的菜单要求来创建具有复杂几何形状的一部分。

Relative three-axis, five-axis machining center programming is very important two points: the drive method and the arbor, these two settings are important.
相对三轴，五轴加工编程很重要的两点：驱动方法和刀轴，这两项的设定很重要。

The AMOS satellite was a new lightweight geostationary communication satellite with a launch weight of less than 1,000 kilograms and a three-axis attitude control subsystem.
AMOS卫星是一种新款轻型地球静止通信卫星，发射重量不足1,000公斤，拥有三轴式姿态控制子系统。

Goddard successfully applied three-axis control, gyroscopes and steerable thrust to rockets to effectively control their flight.
戈达德成功地应用三轴控制，陀螺仪和可控的推力到火箭上，有效地了控制火箭的飞行。

The new gyroscopes- devices that measure angular speeds- will complement ST's portfolio of two- and three-axis MEMS accelerometers to offer customers a complete inertial sensor platform.
新陀螺仪产品是用于测量角速度的元器件，它们的问世将进一步完善ST现有的两轴和三轴MEMS加速计，为客户提供一个完整的惯性传感器平台。

In traditional three-axis machining, very small cuts must be used to create a good surface finish, resulting in longer lead times.
在传统的三轴加工，非常小的切口，必须使用创造了良好的表面光洁度，从而延长了交货时间。

The machining center can be divided into three-axis two-linkage, three-axis three-linkage, four-axis three-linkage, five-axis four-linkage, six-axis five-linkage and so on.
加工中心可分为三轴二联动，三轴三联动，四轴三联动，五轴四联动，六轴五联动等。

It has 16 hydrazine thrusters, three-axis stabilization gyroscopes, and referencing instruments to keep the probe's radio antenna pointed toward Earth.
它有16个联氨推进器，三轴稳定陀螺仪，以及将探测器的无线电天线指向地球的仪器。