What is the translation of " CUTTING PROCESS " in Croatian?

• procesa rezanja
• postupka rezanja
• proces rezanja
• procesu rezanja
• postupak rezanja

Examples of using Cutting process in English and their translations into Croatian

Cutting Process: Drilling Tools.
Proces rezanja: bušenje alatke.

Ensures the timber remains stable during the cutting process.
Osigurava da trupac ostaje stabilan tijekom procesa piljenja.

Advanced cutting process and method.
Napredni postupak rezanja i metoda.

If the support is not stable, then the cutting process may be unsafe.
Ako nosač nije stabilan, postupak rezanja može biti nesiguran.

In the deep hole cutting process, a closed high pressure is formed.
U procesu rezanja dubokog rupa nastaje zatvoreni visoki tlak.

The sheet workpiece can be loaded and unloaded at the same time as the cutting process.
Plošni izratka može učitati i istovaruje u isto vrijeme postupka rezanja.

Through cutting process, up to 6,400 rolls can be made in an hour.
Kroz proces rezanja može se napraviti do 6.4 role u sat vremena.

No need to glue paper onto textile, avoiding manual pollution during scissors cutting process.
Nema potrebe za ljepilo papir na tekstil, izbjegavajući ručno onečišćenja tijekom škare procesa rezanja.

During the cutting process, it is necessary to cool the tool with kerosene or oil;
Tijekom procesa rezanja, potrebno je ohladiti alat petrolejom ili uljem;

In contrast, the use of the saw creates a lot of chippings during the cutting process and requires a lot more time.
Nasuprot tome, korištenje pile stvara dosta otpadaka tijekom procesa rezanja i zahtijeva više vremena.

During the cutting process, the pipe rotates at a high speed and is easily detached.
Tijekom procesa rezanja, cijevni okreće velikom brzinom i jednostavno odvojen.

It is the best automated solution for digital printing, personalized labels and other positioning cutting process.
To je najbolje automatizirano rješenje za digitalni tisak, personalizirane naljepnice i drugih procesa rezanja pozicioniranje.

Analysis of cutting process for tube parts in production 2.1 Processing technology of pipe parts.
Analiza procesa rezanja dijelova cijevi u proizvodnji 2.1 Tehnika obrade dijelova cijevi.

Identify welding Seam, to avlod welding seam during cutting process automatically, and prevent holes from popping.
Identificirati zavarivanje šava, da aviod zavarivanje šava tijekom procesa rezanja automatski, i spriječiti rupe iz iskakanje.

Due to the laser cutting process, the slag will inevitably adhere to a part of the inner wall of the opposite pipe.
Zbog postupka rezanja laserom, troska će neizbježno pridržavati dio unutarnje stijenke nasuprot cijevi.

Identify welding seam to avoid welding seam during cutting process automatically, and prevent holes from popping.
Prepoznati šava zavarivanja kako bi se izbjeglo zavarivanje šava tijekom procesa rezanja automatski, i spriječiti rupe iz iskakanje.

The laser cutting process results in trapezoidal apertures that can create better solder paste release characteristics.
Lasersko rezanje proces rezultira trapezni otvora koji može stvoriti bolje Lem Zalijepi oslobađanja.

Due to the low elastic modulus of the titanium alloy, the workpiece rebounds greatly during the cutting process, which tends to cause the wear of the tool flank and the deformation of the workpiece.
Zbog niskog elastičnog modula legure titana, radni dio se u velikoj mjeri skreće tijekom procesa rezanja, čime se uzrokuje trošenje nosača alata i deformacija obratka.

As the cutting process, the lower layers of the abrasive are exposed, and the old layers together with water form a suspension on the surface of the bar.
Kao postupak rezanja, izloženi su donji slojevi abrazionice, a stari slojevi zajedno s vodom tvore suspenziju na površini štapa.

Laser cutting tube materials is a cutting process which has become more popular in recent years.
Lasersko rezanje cijevi materijala je proces rezanja koji je postao popularan u posljednjih nekoliko godina.

In fact,“high speed” in HSM technology is a relative concept, and the“high speed” speed range defined by HSM for different workpiece materials or different cutting process types is different.
Zapravo,"high speed" u HSM tehnologiji je relativan koncept, a raspon brzina"high speed"(brzina) definiran HSM-om za različite materijale obratka ili različite vrste procesa rezanja je različit.

The carpet fibers are fused by the laser cutting process, which prevents fraying- a common problem when carpet is mechanically cut..
Tepih vlakna su spojena u procesu rezanja laserom, koji sprečava habanje- čest problem kada tepih mehanički smanjiti.

Commercial titanium is similar to austenitic stainless steel in machinability, but because titanium has high chemical activity and poor thermal conductivity, it has a high tendency to stick to the tool surface, so the specific cutting process and steel should be different.
Komercijalni titan sličan je austenitnom nehrđajućem čeliku u obradivosti, ali zato što titan ima visoku kemijsku aktivnost i slabu toplinsku provodljivost, ima veliku tendenciju da se drži površine alata, pa bi specifični proces rezanja i čelik trebali biti različiti.

During the cutting process, the heat dissipation and cooling effects are very poor, and it is easy to form high temperature in the cutting zone.
Tijekom procesa rezanja, učinci raspršivanja i hlađenja topline su vrlo loši, te je lako formirati visoku temperaturu u zoni rezanja..

Therefore, the high temperature heat of the cutting point of the tool during the cutting process of the titanium alloy is difficult to be quickly taken away by the chip, which accelerates the tool wear.
Zbog toga je toplinu visoke temperature točke rezanja alata tijekom procesa rezanja legure titana teško odvojiti od čipa, što ubrzava trošenje alata.

From the cutting process point of view, at such cutting speeds, the temperature is extremely high, ordinary YT15 carbide taps are impossible to use, and carbon nitride coated taps can be processed as they are due to the special physical and chemical properties of the coating.
Sa stajališta procesa rezanja, pri takvim brzinama rezanja, temperatura je izuzetno visoka, obični YT15 karbidne slavine nemoguće je koristiti, a slavine premazane ugljikovim nitridom mogu se preraditi, jer su zbog posebnih fizikalnih i kemijskih svojstava prevlake, Uz trošenje prevlake.

Loading and unloading of machined parts is carried out by a pallet changer table with hydraulic height adaption during the cutting process- retrofitting with additional automation functions is possible.
Utovar i istovar obrađenih dijelova izvodi stol za mijenjanje palete pomoću hidrauličke prilagodbe visine tijekom postupka rezanja; moguće je opremanje s dodatnim automatskim funkcijama.

And then during the cutting process, the grinder and the vacuum cleaner turn on simultaneously, which will help to get rid of the waste materials of the whole process..
A za vrijeme postupka rezanja, brusilica i usisavač istodobno se uključuju, što će vam pomoći da se riješite otpadnih materijala cijelog procesa.

It is well known that the higher the hardness and strength of a metal material, the greater the cutting force required for the cutting process, the higher the cutting temperature, and the faster the tool wear, so the relative workability is worse.
Dobro je poznato da što je veća tvrdoća i čvrstoća metalnog materijala, to je veća rezna sila potrebna za proces rezanja, to je viša temperatura rezanja i brže trošenje alata, tako da je relativna obradivost lošija.

The heat affected zone(HAZ) of the plasma cutting process is generally very narrow, about 0.25 mm(0.010 inch), because the cutting is a single pass, fast operation, and the sheet cools quickly.
Zona zahvaćena toplinom(HAZ) u procesu rezanja u plazmi je obično vrlo uska, oko 0, 25 mm(0, 010 inča), jer rezanje je jednokratno, brzo se provodi, a list se brzo hladi.