Examples of using Conductivity in English and their translations into Czech
{-}
-
Colloquial
-
Official
Was it to increase conductivity?
Conductivity measurements- done properly!
METTLER TOLEDO offers the full range of conductivity cells.
Conductivity sensor for hygienic applications.
SMARTPAT COND 5200* Conductivity sensor for harsh applications.
People also translate
Less Water Use andGreater Product Safety, Conductivity During CIP.
SMARTPAT COND 7200 Conductivity sensor for hygienic applications.
One of the key parameters used in producing demineralized water is conductivity.
Most conductivity measurements are referenced either to 20 C or 25 C.
Concentration of these ions is measured using a conductivity cell on the cartridge.
Conductivity is a cumulative measure of all contaminants in water.
Here you can enter a correction factor for conductivity between 0.10 and 5.0.
Specific conductivity allows the system to monitor ammonia/amine concentration.
Technology of the preparation andapplication of coating systems with higher electrical conductivity.
Cation conductivity gives an initial indication of the contamination from salts and acids.
The permeate flush valve remains closed while the conductivity is below the defined limit.
If we know the conductivity of a solution, we can get an idea of the total content of ions.
Prepared nanocomposite coatings offer excellent corrosion protection properties together with increased electrical conductivity.
Conductivity probes for mobile applications are robust and waterproof according to IP67.
Take a water sample and measure the conductivity with an accurate conductivity meter: calibration value.
Conductivity in water solutions is measured and converted to total dissolved solids TDS.
The lower this value for a material is,the lower its thermal conductivity and the better it is at avoiding thermal bridges.
Inductive conductivity sensor- remote version, remote cable must be ordered separately.
During the previous 5 years this station has produced 800,000 litres of ultrapure water the conductivity of which is lower than 0.1 μS/cm.
By using conductivity cells with integrated temperature sensors this compensation is easily accomplished.
Possible causes: Change in the quality of the water,the system settings have changed, the conductivity module is faulty, the measuring probe has short-circuited.
Conductivity measurement The controller is equipped with a conductivity meter, enabling the conductivity of the permeate to be measured and monitored.
Expandable to a broad range of applications, volumetric orcoulometric Karl Fischer titrations, conductivity titrations and much more.
The UniCond 2-E series is suitable for measuring conductivity in pure and ultrapure waters, pharmaceutical waters, make up water, and wastewater.
A: The conductivity of fresh concrete can be measured using the fresh concrete probe provided by Giatec or using a similar setup.