Examples of using Heating elements in English and their translations into Czech
{-}
-
Colloquial
-
Official
I have neutralized the heating elements.
Heating elements, with keeping warm function.
I have neutralised the heating elements.
The heating elements are made from molybdenum.
Mineral insulated metal sheathed heating elements.
Two different heating elements are available.
High quality 5 mm APM wire heating elements.
Two high-powered heating elements with 3.600 watts each.
PTC products use ceramic heating elements.
When the heating elements are on the switches will illuminate.
The soldering furnace is insulated with ceramic fibre with heating elements of CrFeAl wire.
The heating elements hang vertically and can be easily replaced.
Covering the unit can set temperature is reached, the fan and heating elements turn off.
Do not use the heating elements to dry any other objects.
A safety switch protects the operator by switching off the heating elements once the furnace is opened.
The heating elements are vertically hanging and can be replaced easily.
Plasma sprayed alumina protection tube to protect heating elements from sample contamination.
Heating elements on 3 levels with separate heating and cooling units.
Protection grid in front of heating elements prevent against mechanical damages.
The heating elements and radiation shields are also constructed of molybdenum.
The cylindrical usable space of the laboratory furnace is surrounded by the heating elements and insulation material.
Do not use the heating elements to dry any other objects.
The CDF dental furnace is equipped with 3 robust high-quality heating elements made of silicon carbide.
The silicon carbide heating elements will not cause discolouration of the zirconia.
The cylindrical usable space of the laboratory furnace is surrounded by the heating elements and insulation material.
The radiant heating elements are composed of circular heating elements.
In warm conditions the fan can be used with the heating elements“off” to blow cool air into the room.
The heating elements are made from the same metallic material as the insulation.
The insulation and molybdenum disilicide(MoSi 2) heating elements are installed in the rectangular housing.
The heating elements must not get in contact with sharp objects e.g. knife, fork or similar.