Examples of using Is reset in English and their translations into Czech
{-}
-
Colloquial
-
Official
Alarm is reset.
The theory being, if our timeline is reset.
The device is reset on three two… one.
When you press, the total power consumption is reset.
Your memory is resetting like the guy from the movie"Memento.
To remove safe mode,all you need to do is reset your password.
The MAG 2000 is reset with a special wrench used to open the indicator.
Like the guy from the movie"Memento. Your memory is resetting.
The transfer unit count is reset and the printer is ready to use.
The time set and the data saved in the internal memory will not be deleted even when the system is reset.
The client's account, which is reset to zero, is of the following account types.
The fault alarm signal is cancelled, andthe internal delay time for the alarm is reset.
Error AJ-03 is reset automatically from the moment there is a normal tank heat-up.
With the first day of a new moth the limit is reset and you can collect another ones.
Error EC-04 is reset automatically from the moment the domestic hot water tank is preheated to a sufficiently high temperature.
The rules of poker say that a disrupted game is reset, so we're going to divide the money equally.
When you log into a SOLIDWORKS product,a message informs you that the serial number that you have entered is reset for an online license.
The indicator magnet is reset to its initial position and the housing is locked again.
Each time the instrument is restarted,the back of the instrument is reset as the measurement edge.
The configuration is reset. 4- Press(left) repeatedly if necessary, to close the menu.
After jumper is opened setting of address and check sum is reset in accordance with values stored in the device.
The time allowed to elapse before the panel is reset is set with the PanelReset Timer on page 7-12.
When the high pressure switch is activated it must be reset manually by a qualified person.
This unit can be reset when all operations are rejected.
The product settings are reset to the factory defaults.
The girl can't be reset.
If appears on the display the fault must be RESET by the user.
It's your bionic interface… failing… and being reset.
TempCalSetDefault The temperature calibration data was reset to the default.
ResetTemp CalHist The temperature calibration history was reset.
