Examples of using Iscsi in English and their translations into Czech
{-}
-
Colloquial
-
Official
Creates and manages iSCSI targets.
Click iSCSI, if not already selected.
On the Storage page, click iSCSI.
RAID Storage iSCSI Volume Virtualization.
If not already selected,click iSCSI.
In the iSCSI iSNS Client field, click the toggle button.
Click the toggle button to enable iSCSI.
Click Create iSCSI Target at the bottom of the screen.
Use the following steps to configure the iSCSI iSNS client.
Your new iSCSI target is created and displays in the iSCSI Target List.
My Cloud EX2 Ultra allows you to create and manage iSCSI targets.
Select an iSCSI target from the retrieved list, and then click Next.
Unified Storage- The WD Sentinel DX4200 delivers an ultra-compact andquiet unified storage solution with NAS functionality for file sharing and iSCSI SAN for block level storage for virtualized environments.
Under iSCSI Target list, click Details next to the target you would like to delete.
Volume Virtualization simplifies scalability by allowing you to map iSCSI targets on other network storage devices and present them as volumes on your My Cloud EX2 Ultra device.
The iSCSI target provides storage, similar to a local hard disk drive, but is accessed over a network rather then locally.
One 100/1000 BASE-T iSCSI Port 1"In" connector for connecting additional hosts.
Internet SCSI(iSCSI) is an industry standard developed to enable transmission of iSCSI block storage commands and data over an existing IP network by using the TCP/IP protocol.
Controller capable of supporting sessions from 32 iSCSI initiators(16 hosts with redundant connections) simultaneously with multiple connections per session.
Advanced features- iSCSI target, full-featured FTP services, jumbo frame support, iPv6 ready, UPS support(USB and network), real time resource monitor, volume encryption with boot-up password, SNMP and virtual volumes.
Once the connection is established between the iSCSI initiator and the iSCSI target, the operating system on the iSCSI initiator sees the storage as a local storage device that can be formatted, read, and written in the usual manner.
As with traditional SCSI, an iSCSI storage solution requires at least one“initiator” residing on the client computer and at least one“target” residing on the storage server.
