Examples of using Menu settings in English and their translations into Czech
{-}
-
Colloquial
-
Official
Fig. 6.9: Configuration menu Settings- QoS.
See“Menu settings- Transport. lock.”.
Fig. 6.7: Configuration menu Settings- Radio.
You can override these changes by normal operation of each feature or via the menu settings.
To exit the menu settings> Press.
The serial number is also listed on the menu settings page.
The device exits the Menu settings and prints the list.
It is possible to set the temperature of the hot water see“Menu settings”.
Fig. 6.8: Configuration menu Settings- Ethernet.
To set the position where the indoor unit is installed Set“INSTALLED POSITION” in the menu settings.
Fig. 6.11: Configuration menu Settings- QoS- DSCP.
The appliance switches off automatically after a specific time time span can be programmed,see“Menu settings” Shut off.
Its density is defined in menu Settings Program configuration Coordinate system gridX, gridY.
Just click Start, then Settings, then Start Menu Settings.
As soon as contact established, enter the menu Settings Device and configure the own access parameters.
For the NO contact version,the[HT/NT connection] parameter 0 must be set Main menu Settings Inputs/Outputs.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
Menu settings This menu is used for changing settings individually, accessing information and starting a programme.
This presetting can be modified.~"Menu settings" on page 23.
To reset the menu settings to their default values use[ Reset Settings] under[ Device Menu], or use the ODMS and DSS Player software.
Briefly press the$/± button in order to call up the menu settings and service programmes.
Then go to start menu settings and then you go to the start menu option and you will see here there is a setting for start menu size.
The default time of one hour can be shortened see“Menu settings” Shut off on page 8.
Only available in"barista mode".~"Menu settings" on page 23 The intensity of the taste of a coffee drink can be individually adjusted using the aromaIntense setting.
If changes need to be implemented,perform them in the menu Settings a save them by the command Apply.
It's very easy to disable, the way you do this is you open start menu reviver, you click on the settings, icon, andthen click start menu settings.
If changes need to be implemented,perform them in the menu Settings a save them by the command Apply.
Daikin Altherma integrated solar unit 008.1444099_00- 06/2018- EN For the NC contact version,the[HT/NT connection] parameter 1 must be set Main menu Settings Inputs/Outputs.
Adjusting the drink temperature Only available in"barista mode".~"Menu settings" on page 23 A drink of your choice is selected.
Selection of homepage can be done by pressing the homepage icon(please confirm if you want to use selected homepage“Always” or“Just once”)or in menu Settings-> Home screen.