Examples of using Pulse function in English and their translations into Czech
{-}
-
Colloquial
-
Official
They also don't have the pulse function.
Switch on the pulse function of the line laser.
At first operate short with“Pulse” function.
Press the‘Pulse' function and hold for 1-2.
To do so you can use the PULSE function.
Speed levels, pulse function, On/Off switch.
Which I am putting in the 77. They also don't have the pulse function.
To switch on the pulse function, press button 3.
Cut them into fourths andat first operate short with“Pulse” function.
At first operate using“Pulse” function for each trick piece.
Add the remaining cream to the creamy mixture and stir in briefl y using the pulse function.
Operate short using„Pulse” function, if the mixture is too thick.
By means of this functional button the recovery pulse function is started.
Use the pulse function to have more control over the process.
When working with the laser receiver, switch the pulse function on see“Pulse Function”, page 15.
Use the pulse function to have more control over the process.
The display is completed after 20 second.“RECOVERY” interrupts the recovery pulse function or the fitness mark display.
They also don't have the pulse function, which I am putting in the 77. Hi.- Hi!
In pulse function, the laser lines flash at very high frequency and thus become detectable by the laser receiver 27.
They also don't have the pulse function. Which I am putting in the 77.
With the pulse function, the settings are adjusted manually so that the pressure and the duration of the vacuum can be set individually;
For welding thin sheets, the pulse function is particularly useful.
When the pulse function is switched on, the visibility of the laser lines is reduced for the human eye.
When Pulse Timer 0, the pulse function is disabled default.
Use the pulse function for short periods at a time to prevent the food from becoming too finely chopped.
You can start the recovery pulse function with this function key.
By pressing this function button, the recovery pulse function is started and a fitness grade is calculated.
Therefore, shut off the pulse function by pushing button 3 again when working without laser receiver.
Start from cutting thick ingredients and herbs,operating short with„Pulse” function and then add quark or yoghurt.