Examples of using The extractor in English and their translations into Czech
{-}
-
Colloquial
-
Official
That's just the extractor.
Turn the extractor adapter(3) counter-clockwise.
Place her in the extractor.
And the extractor did not drain, so all cooking skies linger.
I think it's the extractor spring.
People also translate
Darling, would you smoke under the extractor?
Forgot the extractor.
Ground control, this is November 543 Charlie.We're going to need the extractor.
To fire the lock, the extractor has to be.
Turn the extractor adapter(3) anti-clockwise until it engages.
Put the wizard into the Extractor.
You heat up the extractor over the fire and press.
I know that they were fired from an HK SL8. Well, based on the extractor and ejector marks.
Place the extractor near a power socket on a hard, clean, and dry surface.
You know, I don't care about the nub or the extractor or the fact that you're Mr. Gun.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm.
Integrated bayonet fitting as the connecting element between the extractor and the tool.
Buying a Blender compared to the extractor represents a cheaper and an easier investment.
The extractor is very environmentally friendly and safe for humans and the environment.
It allows precise cutting of the sample from the environment andtight closure of the lower part of the extractor.
In the extractor mode air is discharged to the outside by a special conduit.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm.
Switching on the mobile dust extractor via the remote control directly on the suction hose saves you a trip to the extractor.
Ensure that the extractor holes on the abrasive paper and grinding/sanding disc line up.
Insert the extractor adapter into the rear hole of the base runner in so that the hook[2-6] catches in the notch 2-7.
Yeah. bricked around the metal box, fired it up on the first test of one of the engines, They built this engine bay and they mounted this engine on a plinth andthen stuck the exhaust into this metal box, and they didn't turn the extractor fan on.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. the route of the flue must be as short as possible.
The extractor transports the requested tray either directly to the access opening or back to a free storage location within the unit at high speed and at the touch of a button or by scanning a bar code.