Examples of using Wireless remote in English and their translations into Czech
{-}
-
Colloquial
-
Official
When using wireless remote controller.
The nuclear bomb is set up to be detonated by a wireless remote.
When using wireless remote controllers.
Syncing your Conserve Surge Protector and Wireless Remote Switch.
Wireless remote controller with display- RF Pilot.
M*s: swing motor wrc: wireless remote controller.
Wireless remote controller When mounting on a wall etc.
The operation is done via the wireless remote control.
The Wireless Remote Switch with Wall-Mount.
Setting the address of the wireless remote controller See figure 3.
Wireless remote controller 1 Indoor unit fixing screw(M4× 12L) 2.
The water heater is operated with the wireless remote control.
Detachable Wireless Remote Switch with Wall-Mount.
Conduct test operation after installing decoration panel if the wireless remote controller is used.
A green LED on the wireless remote switch will illuminate when the switch is pressed.
To change the channel setting, use a small screwdriver to shift the keys on the surge protector and the wireless remote switch.
The Wireless Remote attaches easily to handlebars which can be transferred between bikes.
Refer to the installation manual attached to the wireless remote controller for setting instructions.
When using a wireless remote controller, it is necessary to set the wireless remote controller address.
Refer to the installation manual attached to the wireless remote controller for setting instructions.
When using wireless remote controllers, wireless remote controller address setting is necessary.
When 2 indoor units are installed in one room,the 2 wireless remote controllers can be set for different addresses.
When using wireless remote controllers, wireless remote controller address setting is necessary.
For those who appreciate even more convenience,the operation of the entire snowmaking system can be done with a wireless remote controller.
Air filter contamination When using wireless remote controllers it is necessary to use address setting.
The wireless remote switch can also be kept conveniently anywhere e.g., by a bed, on a coffee table, on a desk.
How to set the different addresses When 2 indoor units areinstalled in one room, the 2 wireless remote controllers can be set for different addresses.
For using of BRC1E or wireless remote controller, please refer to operation manual provided with the remote controller.
Affix the unit number label Affix corresponding unit number labels onto both air outlet of the decoration panel and onto back of the wireless remote controller.
ALWAYS connect a wired or wireless remote controller(e.g. BRC1E, BRC1H, BRC7), otherwise the online controller will NOT operate.
