Examples of using Your wireless router in English and their translations into Czech
{-}
-
Colloquial
-
Official
Try changing channels on your wireless router.
Your wireless router or access point may have its SSID broadcast disabled.
Press the WPS button on your wireless router.
Reset your wireless router: Sometimes routers just need a hard reset.
These settings must match the settings of your wireless router.
Select the SSID of your wireless router/access point from the Available Network list and click on the Connect this site button.
You need to enable the SSID broadcast on your wireless router or access point.
Connect this powerful system to your wireless router for shared storage on your home network and accessing your files from within and outside the home.
These settings must match the settings of your wireless router or access point.
In the bridge point to point mode,you can connect your wireless router with another, to combine two access points and expand the scope of wireless network, and all clients(wired only- AP will not accept wireless clients in this mode) of two wireless routers will think they're on the same physical network.
If you cannot associate with your wireless router or access point, you will receive a“Device is not associated” message.
If you are not sure how to do this,then refer to the manual that came with your wireless router.
Make sure your DHCP server,which may also be your wireless router, is working and is configured to assign IP addresses.
Unplug the Ethernet cable from your computer, andconnect Zeppelin Wireless to your wireless router.
Connect the My Book Live Duo device to your wireless router to share and access files with any PC or Mac computer on your network.
You may be on a computer that is physically too far away from your wireless router or access point.
If you are having trouble connecting to your wireless router, try locating the DCS-960L into a location that is closer to your router. .
If you cannot complete this ping,verify your internet connection between your modem and your wireless router or access point.
You can usually find your wireless network settings on the set-up screens for your wireless router. The device documentation should have instructions for accessing these screens. For wireless networks set up with Microsoft Windows Connect Now technology, you can use a WCN USB flash drive to quickly configure your Xbox 360 console to connect to the network.
For more information regarding the use of channels, refer to your wireless router or access point's documentation.
To set up wireless communication using SecureEasySetup(SES) If your wireless router is SES capable, see the following instructions to set up using SES.
If you have security enabledon your wireless network, proceed to Client Mode installation with security enabled use Client Mode installation with security enabled if your wireless router or access point is not broadcasting your SSID or if you have WEP enabled.
WHy CAN'T I CONNECT TO my WIrElESS rOUTEr?- If you are having trouble connecting to your wireless router, try locating the DCS-5010L into a location that is closer to your router. .
Does your wireless network router support WPS?
Does your wireless network router support WPS(Wi-Fi Protected SetupTM)?