What is the translation of " BASE CASTING " in Danish?

• base casting
• base støbningen
• base metaldel

Examples of using Base casting in English and their translations into Danish

Finally, remove any Twist or Bow in the base casting.
Endelig, fjerne enhver Twist eller Bow i base støbningen.

Third, any twist in the Base Casting is removed so the Machine will cut accurately.
For det tredje fjernes enhver twist i Base Casting, så maskinen vil skære præcist.

We are now ready to check for twist in the base casting.
Vi er nu klar til at kontrollere for twist i denne base metaldel.

Lift either the front or back of the base casting as necessary to make the machine level.
Ophæve enten fronten eller tilbage af basen casting i nødvendigt omfang at gøre niveauet maskine.

Next, measure for any bow, either up or down along the length of the Base Casting.
Næste, måle for enhver bue, enten op eller ned langs længden af Base Casting.

Re-measuring for Twist and measuring for Bow in the base casting and then measuring the Spindle Sweep.
Re-measuring til Twist og måle til Bow i base støbningen og derefter måle spindel Sweep.

The customer's machine is now at the proper height and level and is free of any twist or bow in the base casting.
Kundens maskine er nu i den korrekte højde og plan og er fri for enhver twist eller stævnen i base støbningen.

Get the amount of"stuffing": multiply the width and length of the base casting on the height and know the total amount of.
Få mængden af"fyld": formere bredden og længden af basen støbning af højden og kender det samlede beløb af.

Set each of the four outer leveling screws to 3 1/2" or(90mm) between the floor and the bottom of the base casting.
Angive hver af de fire ydre udjævning skruer til 3 1/2"eller(90 mm) mellem ordet og bunden af base støbningen.

If the measurement shows there is bow in the base casting in either the up or down direction use the middle screws to make adjustments.
Hvis målingen viser er der stævnen i base casting i enten op eller ned retning Brug de midterste skruer til at foretage justeringer.

With the machine now level front to back and side to side it is time to check for twist in the base casting.
Med maskinen nu niveau fronten til at tilbage og side til side det er tid til at kontrollere for twist i denne base metaldel.

Unfasten the"4th axis oil reservoir" from where it is attached to the base casting and re-attach to the access door in the left side panel.
Unfasten"4th akse olie reservoiret" fra hvor det er knyttet til den base casting og Genmontér til Adgangsdør i panelet til venstre.

Measure from the base casting lower flange and lift the casting four inches(4" or 100mm) off the ground by adjusting the four corner leveling screws to the same height.
Måle fra base casting nedre flange og ophæve castingen fire tommer(4"eller 100 mm) off jorden udjævning skruer til samme højde ved at justere de fire hjørne.

The leveling procedure has three steps: first, set the machine at the correct height to accommodate the coolant tank second, rough level front to back and side to side to promote proper coolant flow and finally, remove any twist in the base casting so the machine will cut accurately.
Udjævning proceduren har tre trin: først skal du maskinen ved den korrekte højde til at rumme den kølervæske tank andet, ru niveau front til tilbage og side til side for at fremme korrekt kølervæske strømme og endelig, fjerne enhver twist i base casting så maskinen vil skære nøjagtigt.

To clear the coolant tank lift the Base Casting three and a half(3½") inches off the ground by adjusting the four corner leveling screws to the same height.
Rydde kølervæske tank ophæve Base Casting tre og et halvt(3 ½") tommer off jorden ved at justere de fire hjørne udjævning skruer til samme højde.

Material Roof top in aluminium, base in cast aluminium.
Materiale Tagplade i aluminium og sokkel i støbt aluminium.

Featuring a round cast base with a 10''diameter, the RI-MICRB10 is exceptionally sturdy with an unobtrusive and compact footprint.
Byder på en runde støbt base med en diameter på 10'', er RI-MICRB10 særdeles robust med en diskret og kompakt fodaftryk.

Arne Jacobsen designed various tables with bases in cast aluminium for the Egg and the Swan chairs.
Til Ægget og Svanen tegnede Arne Jacobsen forskellige borde med understel i støbt aluminium.

Integrated casting base, further increase the stability of the machine.
Integreret støbebase, yderligere øge maskinens stabilitet.

Integrated casting base, further increase the stability of machine tools.
Værktøj ATC Integreret støbebase, yderligere øge maskinværktøjets stabilitet.

Wired remote terminal, precision aluminum casting head base;
Wired remote terminal, præcision aluminium støbning hoved base;

The integration of casting base, further increase the stability of the machine.
Integrationen af støbebase, yderligere øge maskinens stabilitet.

Integrated casting base(optional), to further increase the stability of machine tools.
Integreret støbebase(valgfrit) for yderligere at øge maskinværktøjets stabilitet.

At the same time with the new AC inverter with new spindle motor, increasing the casting base to further improve the stability of the machine.
Samtidig med den nye vekselstrømsomformer med ny spindelmotor, øger støbebasisen for yderligere at forbedre maskinens stabilitet.

Description: The kuroGEL Verti vertical dual-gel units offer the flexibility of running dual gels either cooled or uncooled and with or without a casting base.
Beskrivelse: De vertikale kuroGEL Verti dual-gelenheder, kan håndtere dobbeltgeler, leveres med eller uden køling, og med eller uden et støbefundament.

With 9.0Nm Delta converter with variable frequency motor to achieve efficient operation of machine tools, BT30 Spindle 10000 speed, can be used with pneumatic tool change the structure, the integration of casting base, further increase the stability of the machine.
Med 9,0Nm Delta-omformer med variabel frekvensmotor for at opnå en effektiv betjening af værktøjsmaskiner, BT30 Spindel 10000-hastighed, kan bruges med pneumatisk værktøjskonfiguration af strukturen, integrationen af støbebase, yderligere forøge maskinens stabilitet.

Its base is cast iron to give it a perfect stability.
Dens bund er støbt jern til at give det en perfekt stabilitet.

Each house has eight cards, also numbered 1 through 8 based on casting cost.
Hvert hus har otte kort, også nummereret 1 til 8, der er baseret på casting omkostninger.

Their latest title Bloopers is based around cast and crew of a Hollywood film set, an unusual theme and they have taken a unique approach to it.
Deres nyeste titel Bloopers er baseret på castet og besætningen af en Hollywood film sæt, et usædvanligt tema, og de har taget en unik tilgang til det.

How to use "base casting" in a sentence

Swivel-design base casting provides 360 degree movement for ground balls, pop-ups, and fly balls.

The base casting was flipped on it’s side and leveled in relation to the vise.

Notice that the normal 2.1/2 inch thick base casting is not present on this machine.

An L-shaped base casting 39 supports the spring mounting bracket 16 via the springs 27,36.

Its swivel design base casting provides 360° movement for fly balls, pop-ups & ground balls.

Checking alignment of two base frames and two flap base casting end faces and bores.

The Folding Footboard stays attached to the base casting when secured in the folded position.

Only when necessary will we start from our own base casting or custom granite structure.

When activated, your next Nature spell with a base casting time less than 10 sec.

Beefed up spreaders, resulting in breaking a spreader base casting and loss of another mast.