Examples of using Desired width in English and their translations into Danish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
The desired width in pixels.
Cassette, cut to desired width, alu.
The desired width in pixels.
Cassette, cut to desired width, white.
Continue with garter stitch until piece measures 21 cm or to desired width.
Measure the desired width of the curb and add 5 cm seam allowance on and Acc.
Now the plastic strip is cut to the desired width.
Select the desired width of the processing of the sides of the future curtain after it is cut.
Prostrochite again below to make kulisku desired width for the ring.
When the desired width is reached, the first and the last chain stich are connected with a slip stitch.
Lateral limiter allows you to select the desired width of a quarter.
Calculate the desired width and cut the frills of prepared for this double-width fabric strips plus 3 cm SEAM.
Resize columns: Click the column border and drag to the desired width.
Simply open the hinged lid,adjust the wheel to desired width, and fill the box with your vegetables.
When the curtain is ready, pulling the strings,you can easily it is gathered to the desired width.
Dimity typically produce a width 137 cm, and the desired width is obtained by stitching together a panel to length.
The device is inserted into the boot and opens for a few minutes so thatthe skin is stretched to the desired width.
On the size of 5.60 m length x 2.00 m is the desired width of the customer"spontaneous sunbathing and picnicking on the water with the family" easily possible.
The position of the slitting blade can be adjusted according to the desired width of the coil product.
If the room is too extensive orsimply do notlucky to find the desired width and linoleum have to put two(or more) of the cover band, these joints also need prokleivat.
To see the result of adding 1 to the installation andget the result- the desired width of the transoms.
If you intend to turn over the seams, vykroyte strip material wide enough to wrap cords for edges(see"Basic techniques of cutting and sewing"- Bias binding),and stitch them into the desired width of the ring plus a 2.5 cm SEAM.