Examples of using High current in English and their translations into Danish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
Test wires of high current Two.
High current braided flexible connector.
That allows us to send high current through this thing.
High current due to packing of the pump.
The rivet can be used at high current condition with high performance.
Only 2 m cores possible with packed pump and spirals and high current at the end.
Too high current through or temperature at internal relay.
GK 2000RB is the first 1000W bass head& the first high current instrument amp.
Most runs suffered high current(> 11 A) after about 2 meters of drilling.
Pay attention to the output current indication on the console until the required high current.
Always pay attention to high voltage, high current damage to the device directly.
High current electric conductive wiring terminal Shaft processsed copper part Conductive clamp.
The plates of an SLI battery are designed for high current, short duration discharges.
Combined high current busbar Fixed contact Annular silver brazing electricconductive block.
Manufacturer of solderless connectors and tools,flexible copper connectors, and water cooled high current cables.
If it is not possible to connect to a high current jack, you can power the PAC-9 by leaving a battery in the pedal.
It delivers 38.4, clean, quiet, reliable watts of power,capable of supplying up to seven high current pedals.
Nonetheless, three runs with this pressure tube were hampered by high current after 60 to 90 cm of drilling and runs were stopped.
High current efficiency, excellent corrosion resistance, long anode life, and high current density up to 10000A/M2.
Both runs with the long hallow shaft were short due to high current because of this cutting pitch.
Still, runs begin with a high current that limits drill rpm's, but after a metre or so the current drops an ampere or two and very fine drilling commences.
The two powerful section offer 300mA each, andcan be used to power a range of high current pedals above 100mA.
We have had two short runs with high current in this configuration so far and will continue testing on the night shift.
If one battery is fully charged and the other is completely drained,there is an incredibly high current between the batteries.
Manufacturer of high voltage electromechanical and reed relays, high current and voltage switches, vacuum contactors and circuit breakers, and, measurement and isolation equipment.
The other sections are all set to DC power,allowing players to power a range of low current to high current pedals.
Solve the problem of uniform plating of deep hole plating, high current efficiency, and can withstand 1000A/M2 current density.
Molybdenum molten glass corrosion resistance strong,it made of glass melting electrodes, 1~ 3A/cm2 can withstand high current loads.
Service battery overheated Check condition and/or installation Too high current through or temperature at internal relay.
Yttrium tungsten electrode is primarily used in military and aviation industry with narrow arc beam, high compressing strength,highest welding penetration at medium and high current.
