Examples of using Printer will in English and their translations into Danish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
The printer will hold it into place.
The name of the domain where the printer will reside.
Your printer will automatically alert you when supplies begin to run low.
The network mask of the network where the printer will be used.
You can choose when the printer will clear the settings you have previously selected.
When you load a paper size that is the same size as your output image, the printer will print a borderless photo.
The printer will not reach maximum 802.11n data throughput rates on an 802.11g network, however.
If the network uses Auto IP, the printer will assign itself an IP address.
The printer will not reach maximum 802.11n data throughput rates if it is used on an 802.11b or 802.11g network.
When there is no value defined for the LAA, the printer will use the UAA as its MAC address.
All prints sent to this printer will be sent to windows print server and will be converted to image file or converted to.
If other devices on the wireless network are 802.11b-compliant or 802.11g-compliant, the printer will communicate properly.
If the LAA is assigned a value, the printer will ignore the UAA and use the LAA as its MAC address instead.
The timeout(in seconds) for network printers- if we do n't get an update within this time, the printer will be removed from the printer list.
The printer will be configured for a remote network and you do not want to verify that it can communicate over the network when the installation finishes.
If your network uses the 802.11a standard, the printer will not be able to communicate with other wireless devices.
Note: If the printer will use a DHCP address, it is not necessary to determine the IP address and network information before setting up the printer. .
Note: When you load a paper size that is larger than your output image, the printer will print as many pictures as it can on that page.
The printer will retain the settings provided during installation, but you cannot verify that they are correct until the printer is connected to the intended network.
If you select any other setting than Auto,be sure it is correct or the printer will not be able to communicate on the network.
If a problem is identified, the printer will automatically start a cleaning cycle and in a few seconds the printer is ready to print again, ensuring maximum accuracy on crucial elements on the printed labels such as barcodes and colour codes.
The Auto setting means that the channel is controlled by the wireless router, and the printer will automatically use the same channel as the router.
As my sister, who runs a professional printing business, found out when her Canon needed to be repaired for the second time,it's difficult to run a business when your printer will be in the shop for a week.
Browse timeout(BrowseTimeout) The timeout(in seconds)for network printers- if we do n't get an update within this time the printer will be removed from the printer list. This number definitely should not be less the BrowseInterval value for obvious reasons. Defaults to 300 seconds. ex: 300.
Note: The Lexmark Wireless Setup Utility will report that the setup was unsuccessful on the last screen, but the printer will be configured correctly for the remote network.
If the printer and computer are configured correctly, andthe wireless network is working, but the printer will not print wirelessly, a firewall could be the problem.
While the large-format and Point of Sale sectors continue to be attractive growth areas, printers will only achieve profitability if they can combine efficiency and cost-effectiveness with consistently high quality output.