Examples of using Basic stamp in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Its full name is BASIC Stamp 2 Code File.
OK, so now we hooked to LCD up to our Basic Stamp 2.
Uses a Basic Stamp to automate things,
How to program your Basic Stamp using your PC?
I have no experience with the Macintosh in combination with the Basic Stamp.
However, a Basic Stamp is expensive while you will have a PIC for a few dollar.
The full name of the file is BASIC Stamp 2 Code File.
The Basic Stamp 1 series used the parallel-port(or printerport) of your PC.
For more info on PIC's see the BASIC Stamp pages.
A Basic Stamp has 16 in/outputs(like the PIC 16F628) or on a more expensive version 32x I/O.
This page is based on the Parallax(OEM) Basic Stamp II microcontroller.
The BASIC Stamp is programmed in a variant of the BASIC language, called PBASIC.
Step one in the programming process is to get connected with your Basic Stamp.
The BASIC Stamp 2 SX Plus(BS2PIC)
LCD_Pin4 and LCD_Pin14 should not be connected to the same pin on the Basic Stamp.
The Basic Stamp 2 models use ONLY the serialport, and the Basic Stamp 1 ONLY the parallelport!
BS2 files are Developer Files primarily associated with Basic Stamp 2 Code File.
But newer Basic Stamps come with integrated I2 C commands,
You could use this to hookup a LED(Light Emitting Diode) to indicate that the BASIC Stamp is powered.
Note: code once stored on the Basic Stamp CANNOT be retrieved back from the Basic Stamp!
On this page you will find a brief instruction on how to assemble the Parallax OEM Basic Stamp II.
When you program the Basic Stamp the Basic program comes not in the PIC(here's the Basic interpreter)
This serie of pages on this website will help you on your way with the Parallax(OEM) Basic Stamp II microcontroller.
and sells BASIC Stamp microcontrollers, Propeller microcontrollers,
For the more experienced users, here you see the scematics of the OEM Basic Stamp II click to enlarge.
The OEM Basic Stamp 2 kit has already a serialport connector mounted(D-Sub 9)
minimum 24 pins in DIL format(see photo), so that the Basic Stamp fits in a normal IC socket.
and sells BASIC Stamp microcontrollers, Propeller microcontrollers,
the fastest serial I/O in the BASIC Stamp family.
For a Basic Stamp is no programmer necessary, you connect it directly on the(serial) COM port from your PC or laptop, as soon as the Basic program is stored in the EEPROM, you can disconnect the connection between PC and the Basic Stamp.