Allow to cool and back titrate with the sodium hydroxide solution 3.6.
Koel de oplossing af en titreer de overmaat zuur vervolgens terug met de natriumhydroxideoplossing 3.6.
Sodium hydroxide solution Water for injections.
Natriumhydroxide oplossing Water voor injectie.
Solubility Soluble in 10% sodium hydroxide solution.
Oplosbaarheid Oplosbare stof in 10%-de oplossing van het natriumhydroxyde.
Mannitol Sodium hydroxide solution 2% for pH adjustment.
Mannitol Natriumhydroxide oplossing 2% voor pH aanpassing.
Neutralize the surplus acid with the 5 mol/l sodium hydroxide solution(4.12) using the pH meter.
Neutraliseer met behulp van de pH-meter de overmaat zuur met de natriumhydroxideoplossing 5 mol/l 4.13.
Hence sodium hydroxide solutions with concentrations of up to 5 M are used.
Daarom wordt aangeraden HDMI-kabels te gebruiken met een maximale lengte van 5 meter.
The complex is titrated with sodium hydroxide solution to a pH of 6,3.
Het complex wordt getitreerd met een natriumhydroxideoplossing tot pH 6, 3.
Sodium hydroxide solution made by dissolving 20 g sodium hydroxide in 80 ml of water.
Natriumoxydeoplossing, verkregen door het oplossen van 20 g natriumhydroxyde in 80 ml water.
And water for injections, sodium hydroxide solution and hydrochloric acid solution..
Water voor injecties, natriumhydroxideoplossing en zoutzuuroplossing.
measured by back-titration with sodium hydroxide solution.
bepaald door terugtitrering met een natriumhydroxideoplossing.
Hydrochloric acid and/ or sodium hydroxide solution may be added to adjust pH.
Zoutzuur- en/ of natriumhydroxideoplossing kunnen toegevoegd zijn om de pH aan te passen.
And then this will give us-- the milliliters cancel out-- 34.47 divided by 1,000 is 0.03447 liters of this 0.485 molar sodium hydroxide solution.
Dan geeft dat ons, als je de millliliters wegstreept, 34, 47 gedeeld door 1000 is 0.03447 liter van deze 0.485 molair natriumhydroxide oplossing.
Hydrochloric acid solution and/ or sodium hydroxide solution as appropriate.
Zoutzuur oplossing en/ of natriumhydroxide oplossing voor zover nodig.
Dilute the 0,5 mol/l sodium hydroxide solution(4.3) 20 times with boiled water and mix thoroughly.
Verdun de natriumhydroxideoplossing 0, 5 mol/l(4.3) 20 maal met gekookt water en meng.
Hydrochloric acid solution and/or sodium hydroxide solution for pH adjustment.
Zoutzuur oplossing en/of natriumhydroxide oplossing voor pH-aanpassing.
Neutralize with 2 mol/l sodium hydroxide solution(4.8) and acidify again with a drop of hydrochloric acid 4.1.
Neutraliseer met natriumhydroxideoplossing 2 mol/l(4.8) en maak daarna weer zuur met een druppel zoutzuur 1+ 1 4.1.
Solution A: Dissolve 1 g of methyl red in 37 ml of 0.1 mol/l sodium hydroxide solution and make up to one litre with water.
Oplossing A: los 1 g methylrood op in 37 ml natriumhydroxideoplossing 0, 1 mol/l en vul aan met water tot 1 liter.
In addition, hydrochloric acid and/or sodium hydroxide solution may have been added for pH adjustment.
Ook kunnen zoutzuuroplossing en/of natriumhydroxide- oplossing zijn toegevoegd voor de aanpassing van de zuurgraad.
Adjust the pH to exactly 6,3, first with the 0,5 mol/l sodium hydroxide solution(4.3), then with the 0,025 mol/l solution 4.4.
Breng de pH van de oplossing op exact 6, 3, aanvankelijk door toevoeging van natriumhydroxide 0, 5 mol/l(4.3) en daarna met natriumhydroxide 0, 025 mol/l 4.4.
add not less than 5 ml of sodium hydroxide solution to the funnel, lift the stopper slightly and allow the sodium hydroxide solution to run slowly into the flask.
de analyseoplossing in de destillatiekolf overbrengen, ten minste 5 ml natriumhydroxideoplossing in de trechter doen, de stop even oplichten en de natriumhydroxideoplossing langzaam in de kolf laten vloeien.
Taking care to avoid any loss of ammonia, add to the contents of the distilling flask 50 ml of concentrated sodium hydroxide solution(4.6), or in the cases where 20 ml of hydrochloric acid(1+ 1)(4.1) has been used to dissolve the sample, add 60 ml of concentrated sodium hydroxide solution 4.6.
Voeg bij de inhoud van de destillatiekolf- met de nodige voorzorgen om elk ammoniakverlies te voorkomen- 50 ml van de geconcentreerde natriumhydroxideoplossing(4.6) of 60 ml van dezelfde oplossing, indien voor het oplossen van het te analyseren monster 20 ml zoutzuur 1+ 1(4.1) is gebruikt.
And taking care to avoid any loss of ammonia, add to the contents of the distillation flask 10 ml of concentrated sodium hydroxide solution(4.8) or 20 ml of the reagent in the cases where one has used 20 ml hydrochloric acid(4.1) in order to dissolve the test sample.
Voeg bij de inhoud van de destillatiekolf- met de nodige voorzorgen om elk ammoniakverlies te voorkomen- 10 ml van de geconcentreerde natriumhydroxideoplossing(4.8) of 20 ml van dezelfde oplossing, indien voor het oplossen van het te analyseren monster 20 ml zoutzuur(4.1) is gebruikt.
followed by neutralization with 20% sodium hydroxide solution in a quantity of 38 litres per 100 m3,
gevolgd door een neutralisatie met natronloog van 20% in een hoeveelheid van 38 liter op 100 m3(0,
Description: Sodium hydroxide standard solution 0.1 mol/l(0.1 N) in water.
How to use "natriumhydroxide oplossing, natriumhydroxideoplossing" in a Dutch sentence
Een zeer geconcentreerde Natriumhydroxide oplossing is bijtend ja.
Gebruik: sluit de natriumhydroxideoplossing onverdund aan op het doseersysteem.
In 1 ml oplossing voor iv en / m introductie bevat:
werkzame stof: methylethylpyridinol hydrochloride (emoxypin) - 30 mg;
hulpcomponenten: natriumhydroxideoplossing 1 M, water voor injectie.
Neutraliseer zo nodig met zwavelzuur 0,05 mol/l (4.2) of natriumhydroxideoplossing 0,1 mol/l (4.3) t.o.v.
Een blancotitratie van 25,00 ml natriumhydroxideoplossing verbruikt 23,95 ml zoutzuur.
Niet meer dan 0,2 ml of 0,1 M natriumhydroxideoplossing 0,1 M zoutzuur is vereist voor het wijzigen van de kleur van de indicator.
TegenwoordigThorium is te bereiden door thoriumhoudende ertsen (vooral monaziet) op te lossen in een geconcentreerde natriumhydroxideoplossing (natronloog) of in zwavelzuur.
Los het isoeugenol opgelost in 10% natriumhydroxideoplossing van het filtraat op en voeg het natriumnitrobenzeensulfonaat gedurende 3 uur onder terugvloeikoeling.
De andere stoffen in dit middel zijn glycerol 85%, natriumacetaattrihydraat, methionine, metacresol, zoutzuur (voor pH-aanpassing), natriumhydroxideoplossing (voor pH-aanpassing) en water voor injecties.
Vervolgens wordt hierbij een natriumhydroxide oplossing gedaan en de oplossing wordt groen.
Nederlands
Deutsch
Español
Français
عربى
Български
বাংলা
Český
Dansk
Ελληνικά
Suomi
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文