Examples of using The surface quality in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The surface quality is not affected.
Drought conditions have no effect on the surface quality.
The surface quality is not affected.
Selection plating process depends on the surface quality.
Check the surface quality after cleaning.
People also translate
Sandblast pretreatment on steel plates and the surface quality reaches Sa2.5;
The surface quality of heavy plates meets EN 10163 2.
Old lacquer/hardener mixtures impair the surface quality adhesion/stability.
Check the surface quality of bathroom cabinet.
Cylinder: The inner wall is honed, and the surface quality is higher.
Improves the surface quality, lengthens the service life.
Old lacquer and hardener mixtures affect the surface quality adhesion/resistance.
The surface quality is good
Old lacquer/ hardener mixtures impair the surface quality(bond/ resistances).
The surface quality is not as high as the BK7 versions.
Old lacquer/hardener mixtures will affect the surface quality(adhesion/resistance).
However, the surface quality is very susceptible to dirt and splashing water.
Old lacquer/hardener mixtures impair the surface quality(bonding/resilience).
Improve the surface quality and mechanical performance Specifications.
Old lacquer and hardener mixtures affect the surface quality(adhesion/resistance).
If the surface quality is poor,
Therefore, the surface of the prototype is strictly granular and the surface quality is not high.
First, check the surface quality of the shaft seal.
TP-20 can be used in PVC formulations to improve the processability and the surface quality.
We determine the surface quality requirement in consultation with our clients.
The surface quality of stainless steel flat bar is specified in the standard.
The surface quality and mechanical properties are basically the same as that of the tube.
Dynamic mould heating has a major effect on the surface quality of a novel ABS/PC blend,
