Examples of using To the anode in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The+ LED is connected to the Anode of the original LED,
This X-ray tube has a glass cooling water reservoir which is connected to the anode.
An electrolytic cell is produced when voltage is applied to the anode.
Tungsten Cathode polarity with respect to the anode can be positive or negative;
Electrons are relayed through the gas from the cathode to the anode.
When installing the battery, pay attention to the anode and cathode of the battery.
Current can only flow in one direction through the device-from the cathode to the anode.
A power supply supplies a direct current to the anode, oxidizing the metal atoms that it comprises and allowing them to dissolve in the solution.
This current allows for electrons to move to the anode and cathode.
A power supply supplies a direct current to the anode, oxidizing the metal atoms that it comprises and allowing them to dissolve in the solution.
we connect the screen grid to the anode in each EL34 pentode.
An electrochemical hydrogen compressor is a hydrogen compressor where hydrogen is supplied to the anode, and compressed hydrogen is collected at the cathode with an exergy efficiency up to and even beyond 80% for pressures up to 10,000 psi or 700 bars.
Holst remembers how Tellegen suggested,“what if we insert a loosely winded third grid to push these electrons back to the anode?”.
then electrons push in from the n side in the direction of the junction area to the anode.
reduction couldn't occur in a power cell without an internal way to carry electrons back to the anode, balancing the external flow of current.
this in turn means the attraction of the electrons to the anodes is exceptionally strong making this system very effective.
During electrolysis, there is an electric current from the anode to the cathode.
If you prefer small adjustments to the sacrificial anode, or custom-build?
Electrons flow through the anode to the outside circuit.
Set the voltage of the anode to 30-50 V.
Carbonaceous anode to the main plate