Examples of using Width should in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Their width should reach two centimeters.
At least 80% of total length& width should be pasted.
Cut fabric- width should be 10 cm, length- 2 feet.
The proposed restrictions as regards height and width should furthermore be removed.
What Channel Width should I set on the Linksys WRT1900AC?
The slope of it is made from the wall outwards and its width should be from 70 to 120 cm.
The width should not be adjusted,
In the first case, the width should be at least 90 cm or 1 m.
Its width should be no less than the level of the material is poured.
Boards thus incorporate shpuntami, their width should make of 40-60 mm about 200 mm, a thickness.
Its width should be greater than the width of the base.
Children aged 7-10 years can sleep on a high bed without boards(loft bed), and its width should not be less than 80 cm.
The length and the width should form a perfect square.
Its width should be greater than the thickness of the beam by approximately 10 cm;
Typically, blind area is used as a walkway around the house and for the ease of use of its width should be no less than 1m.
As a rule, its width should be not less than 60- 80 sm, height- 75 see.
the necessary thickness which width should be equal to width brusochkov.
The energy director width should be 25% to 30% of the wall thickness.
Midline in projects zabezhnymi steps takes place in the 40-50 cm from the inner fence, along the midline of the tread width should be equal to the width of the stage with a direct march.
Therefore their width should be in one
This bedside table should be enough steady and strong, and its width should correspond to width of a table-top approximately.
The external width should be as small as possible,
plus spine width should not be wider than an A3 420mm x 297mm 16.54" x 11.69.
on the other hand she leans against a bedside table which width should be a minimum 35 see.
The thickness corresponds to a thickness of boards, and the width should be approximately 8-12 the Internal basic board see is cut in crossing places according to size reek.
In width they should be 3-5 cm already given their thickness.