Examples of using The particle size in English and their translations into Finnish
{-}
-
Medicine
-
Colloquial
-
Official
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
The particle size of the powder is 25~45 μm.
The particle size, acidity, humus content, the presence of microorganisms- all this determines the success of horticulture.
The particle size not only affects the final appearance of the surface and the degree of relief, but also on material consumption.
The particle size of the inorganic pigments is often larger than on organic pigments thus all inorganic pigments are not suitable to be used in the offset printing.
Solutions:(1) check the worn blades;(2) adjust the position of roller shell;(3)reduce the particle size of powder;(4) keep steam pressure stable.
This problem was overcome by reducing the particle size, coating the LiFePO 4 particles with conductive materials such as carbon nanotubes, or both.
But if the particle size is too large, it will cause difficulties in melting, such as if aluminum oxide particles is too large, and not melted finished, stones will be happened.
As regards dusts, it is sometimes possible to increase the particle size of the substances used, so that explosive mixtures cannot be formed.
In addition, the particle size is too small, will cause the powder feeding process of"blocking powder" phenomenon, resulting powder feeding discontinuous detriment Coating.
In general, the main purpose of faecalpumps- pumping of viscous anddense liquids that contain a large fraction of solids of different sizes even if the particle size is too large, it will not be a problem, you can buy the fecal pump with macerator, which is able to grind any solids.
Solutions:(1) Increase the amount of steam added;(2)reduce the particle size of powder;(3) reduce the content of crude fiber and mineral supplement in the materials.
Composed of three different ways of doping the composite molybdenum powder, the particle size distribution with different levels of visible way affect the doped oxide doped with molybdenum powder in the uniformity of the distribution, andthen affect the final particle size of the obtained composite of molybdenum powder.
According to Dr Heiskanen, the difference can be explained by the particle size and basic fertilizer in the Sphagnum moss growing medium not being optimal in the preliminary test.
Question 5- The Applicant should justify why the product is considered equivalent when the particle size comparison with spacer is not able to demonstrate equivalence in the pool of throat+ stage 0+ stage 1, pooled as desired by the Applicant with the 20% acceptance range and pool of stages 2+ 3, as desired by the Applicant, with the 15% acceptance range, mainly because the sample size of this comparison has not been calculated appropriately.
According to the requirements of the feed machinery manufacturers, the particle size of the raw materials after crushing should all pass through the 8-mesh screen, but the 25 mesh screen material should not be more than 35.
Because the fineness of grinding raw material determines the surface area of pellet feed,the finer the particle size is, the larger the surface area is,the faster the material absorbs the moisture in the steam, the easier it is to conditioning and form the particles. .
Understanding the relationship between particle size, performance and pressure.
Most particle size of 1μm so,only the individual particle size of 2μm.
Particle size finer than the previous two, and more uniform particle size of 05~ 1μm.
The average particle size of powder can be adjusted.
The typical particle size is between 2 and 10 μm.