Examples of using Three terminals in English and their translations into Finnish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
The airport has three terminals.
We operate at three terminals Kantasatama, Luonnomaa and Logistore.
The airport operates with three terminals.
Normally, there are three terminals above for micro switch connection.
Generally, the micro switch has three terminals.
Micro switch three terminals connect with three different points.
The Difference Between Two and Three Terminals….
The SPDT has three terminals: a common pin and two pins for connecting to the common.
The SPDT switch should normally have three terminals.
The airport has three terminals: A& B for Schengen and C for both Schengen and non-Schengen departures.
Don Mueang International Airport has three terminals.
The airport has three terminals: Terminal 1,Terminal 2 and Terminal 3.
The South Harbour has eight named piers and three terminals.
The airport has three terminals two of which are mainly for local flights and one for international flights.
We have different models with two terminals and three terminals.
Basic micro switch is equipped with three terminals to realize snap action and the electrical rating can be 0.1A 5A 16A etc.
The following macro gathers you to understand the differences between the rocker switch with two terminals and three terminals.
Miniature micro switch is equipped with three terminals and roller or straight lever to realize momentary control.
Huizhou Greetech Electronics develop a new basic micro switch in the recent,this switch is equipped with roller lever and three terminals.
Limit switch will control these systems by“ On and Off“ with three terminals or four terminals contact.
Whichusually have two or three terminals and levers, so intelligent control of different lighting effects can be achieved.
Normally, the micro switches used in lighting equipments have two or three terminals and levers so that the smart control can happen.
Three terminals should not have indicator lights, but with a normally open normally closed point, usually the center is a common point, the two ends are normally open or normally closed(that is, switches with different orientations) when doing the switching.
The used micro switch inside the device normally has two or three terminals and levers so that the smart control for differe.
They have different designsfor different control systems, with wires or without wires, three terminals or even six terminals etc.
Greetech G10 subminiature micro switchis equipped with three terminals and lever to realize snap action control and the electrical rating can be 0.1A 1A.
Normally, the micro switches used in lighting equipments have two or three terminals and levers so that the smart control can be possible.
Its mechanical frequency reach 120 cycles per minute, three terminals with long roller lever for the switch and get global approvals.
This snap action switchis with IP67 rated, being waterproof and dustproof with three terminals, can be equipped with different levers base on customer's requirements.
Although the schematic is drawn showing a three terminal ECM, two terminal ECM's may be used, the following page in the practical section shows the changes.