Examples of using Angular profile in English and their translations into French
{-}
-
Colloquial
-
Official
Cut and insert the angular profiles.
Cut the angular profiles with the same height of the wall.
Leveling and positioning of angular profiles.
The angular profile should ideally overlap the angle range.
Their outlets D, in contrast,have an angular profile.
Chisels have angular profiles in the form of a Latin letter V.
Plotter having a support platen of angular profile.
Available with P angular profile in different thicknesses and colours.
Fits directly to the decks by using an angular profile.
The advantage of the angular profile is thatit is sufficiently tight to the corner partition 90?
To stone works apply also metal squares from an angular profile.
Application: For gripping and holding pipes and angular profiles such as hex nuts in the installation area.
Machines with vertical, horizontal oroblique dies(for angular profiles.
The lateral edges 36 have an angular profile and embody physical interference, thus preventing rotation.
In order to avoid such undesirable effects common to use angular profiles PU.
The sliding rim 11 is made of an angular profile with a first leg 12 and a second leg 13.
The mezzanine is started from the marking and installation of the angular profile.
A minimum of 2.5 mils of a sharp, angular profile depth is required.
The first siding panel(evenly trimmed)is wound into the groove of the angular profile.
For rapid and optimum gripping andholding of pipes and angular profiles such as hex nuts in the installation area.